Features:
- Adds an MCS BASIC 52 execution environment to a Series One rack.
- Retains application and working data in 56K of battery-backed RAM.
- Exchanges serial data through an RS-232 interface from 300 to 19,200 baud.
The IC610ABM100 gives a Series One or Series One Plus controller a local environment for calculations, text-oriented processing, and serial-device interaction outside the ladder program.
GE-specific commands extend the BASIC language so the module can exchange information with the installed controller while running its own application logic.
A single rack slot combines the interpreter, retained memory, communication port, and front-panel status indicators in one serviceable module.
Apter Power can prepare a quotation and provide available OEM documentation for the General Electric IC610ABM100 ASCII/BASIC Module.
General Electric IC610ABM100 ASCII/BASIC Module Manuals, Datasheets, Links
Contact Apter Power if you need an available OEM publication for the exact IC610ABM100 application.
Separating the module application from ladder control
- Language base: Build the module application in MCS BASIC 52.
- GE extension: Use the added commands for controller-oriented data handling.
- Local execution: Run the BASIC routine on the module's own processor.
- Program record: Keep a verified source copy outside the installed rack.
Matching the RS-232 device and port settings
- Connector: Use the front 9-pin D-sub serial interface.
- Signal type: Connect equipment that follows the documented RS-232 arrangement.
- Baud selection: Set a supported rate from 300 through 19,200 baud.
- Handshake check: Confirm the required transmit, receive, RTS, and CTS behavior before commissioning.
Protecting the retained BASIC application
- Memory space: Use the 56K battery-backed RAM for program and working data.
- Backup copy: Archive the current application before module or battery service.
- Battery warning: Respond to a low-battery indication before retained data is placed at risk.
- Recovery test: Reload the verified program and confirm its startup behavior after replacement.
Reading the front-panel indicators by function
- PWRD: The green indicator reports module power.
- DIAG and BATT: Red indicators identify a diagnostic condition or low battery.
- TXD and RXD: Amber indicators show serial transmit and receive activity.
- RTS and CTS: Amber indicators expose the two hardware-handshake states.