Features:
- Divides drive, motor-loop, calculation, and LAN functions among DCP, MCP, CMP, and LCP sections.
- Supports DLAN+, DLAN, Genius, CPL, and C-bus through their documented onboard or auxiliary interfaces.
- Presents board diagnostic and operating information on a 16-character display.
The
DS200LDCCH1A integrates drive processing and LAN communication on one assembly. DLAN+ uses ARCNET, while the remaining buses connect through their assigned onboard or auxiliary-board interfaces.
Genius communication is provided through a DS200ADGI board, and CPL or C-bus communication uses the DS200ADCI interface. This distinction determines which physical connector and option-board path carries each network.
Multiple reset sources act on the processor sections, and the optional handheld programmer connects through KPPL. The onboard PROM and EEPROM devices retain software and board-specific information used by the control architecture.
A quotation and authenticated General Electric documents for the DS200LDCCH1A Drive Control and LAN Communications Board can be requested from Apter Power.
General Electric DS200LDCCH1A Drive Control and LAN Communications Board Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Four-Processor LDCC Architecture
- Drive processor: DCP executes general drive control and works with A/D, D/A, and VCO peripherals.
- Motor processor: MCP handles high-speed and conventional I/O together with motor-control loops.
- Calculation processor: CMP performs math-intensive conditional operations.
- LAN processor: LCP executes the board’s network communication functions.
- Shared operation: The four processors exchange data while retaining their assigned control domains.
Five Supported LAN Connections
- DLAN+: ARCNET circuitry provides the DLAN+ communication path.
- DLAN: The board supports the documented DLAN interface independently of DLAN+.
- Genius bus: Genius communication is connected through a DS200ADGI interface board.
- CPL bus: CPL communication is connected through a DS200ADCI interface board.
- C-bus: C-bus also uses the assigned DS200ADCI path.
Memory, Display, and Reset Configuration
- Flash PROMs: Six devices occupy U6, U7, U11, U12, U22, and U23.
- EEPROM: U9 retains the documented electrically erasable data.
- Local display: A 16-character display reports operating and diagnostic information.
- Programmer port: KPPL connects the optional handheld Programmer.
- Reset behavior: Processor sections respond to the documented power, watchdog, local, and system reset paths.
DIRECTO-MATIC 2000 Control Uses
- Drive control: The board is the primary drive-control assembly for DIRECTO-MATIC 2000 equipment.
- Exciter control: The same architecture supports documented exciter applications.
- Analog conversion: DCP peripherals provide A/D, D/A, and VCO interfaces for control signals.
- Motor-loop control: MCP resources execute the faster I/O and loop functions.
- Network integration: Five supported bus systems connect drive control with local and plant communication paths.