• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      sales1@apterpower.com
      +86 181 0690 9650
      Request a

      Fast Quote

      Manufacturers
      ALL MANUFACTURERS
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        Manufacturers
        sales1@apterpower.com +86 181 0690 9650
        Choose a manufacturer
        ALL MANUFACTURERS
        Ask our team:
        • Phone: +86 181 0690 9650
        • E-Mail sales1@apterpower.com

        • Lifecycle status

          Active / Available from OEM
          Apter Power can support F2 DO 8 01 quotation requests and provide official HIMA documentation for existing HIMatrix relay-output installations.

        F2 DO 8 01

        / 4.9
        1001 reviews ｜ Need a Specific Revision?
        HIMA F2 DO 8 01 is a HIMatrix remote I/O module with eight relay outputs and two safeethernet ports.
        In Stock
        Ships by Thursday, October 29
        Fast Shipping Available
        Get a quick price for F2 DO 8 01
        Quantity
        *E-mail
        Company
        *Mobile
        *Content
        Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
        Get a Quote
        Warranty Policy
        We provide 1 year warranty for all remaining parts.
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        Return Notice
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
        Shipping Mode
        Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
        Parts Availability
        Apter Power offers a wide range of components, products and services related to industrial automation. We also supply new products from a variety of quality manufacturers.
        How to order
        We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online. If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.

        Technical specifications for F2 DO 8 01

        • Manufacturer:
          HIMA
        • Part Number:
          F2 DO 8 01
        • Product Family:
          HIMA HIMatrix system
        • Product Type:
          HIMatrix Remote Relay Output Module
        • Stock:
          1
        • Outputs:
          8 relay channels
        • Output Voltage:
          Up to 250 VAC/DC
        • Ethernet:
          2 x 100Base-TX
        • Protocol:
          safeethernet
        • Supply:
          24 VDC
        • Power Consumption:
          14.4 W maximum
        • Operating Temperature:
          0 to 60 °C
        • Protection:
          IP20
        • Estimated shipping dimensions:
          20.7 x 11.4 x 8.6 cm
        • Tariff Code:
          8537101190
        • Country of origin:
          Germany
        • Place of shipment:
          Xiamen,Fujian,China
        By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

        More Information

        Overview Manuals Relay Outputs Safeethernet Installation Applications

        Features:

        • Eight safety-related relay outputs
        • Two 100Base-TX safeethernet ports
        • 24 VDC IP20 remote I/O enclosure
        F2 DO 8 01 moves eight relay switching functions closer to field loads while remaining linked to the HIMatrix safety application.

        Dual network ports support the approved safeethernet topology, and channel diagnostics help verify the commanded safe state.

        Contact load, suppression, external protection, wiring separation, network timing, and cabinet temperature are checked before energization.

        Quotation assistance and official HIMA documentation for the HIMA F2 DO 8 01 HIMatrix Remote Relay Output Module are available from Apter Power.
        HIMA F2 DO 8 01 HIMatrix Remote Relay Output Module Manuals, Datasheets, Links Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

        Eight safety-related relay outputs

        • Channel count: F2 DO 8 01 provides eight independently addressed relay-output channels.
        • Switching level: The documented relays can switch field circuits with contact potential up to 230 V within the permitted current and load category.
        • Safe response: Output behavior follows the de-energize-to-trip or energize-to-trip strategy configured for the safety function.
        • Load protection: Each circuit is coordinated with external fusing and suppression suitable for the connected AC or DC device.
        • Channel assignment: The SILworX project links every relay to its field load, safe state, diagnostics, and proof-test step.

        Dual-port SafeEthernet connection

        • Ethernet ports: Two 100Base-TX interfaces connect the remote output block to the approved HIMatrix network.
        • Safety protocol: SafeEthernet transports safety-related output commands and status between the controller and F2 DO 8 01.
        • Network path: Switching and cabling are arranged so the remote block remains within the validated topology and fault-reaction time.
        • Addressing: System ID, IP settings, and peer assignments must match the downloaded safety project.
        • Timing budget: Communication cycle and watchdog parameters are checked against the required response time of the final elements.

        Mounting and connecting the relay block

        • Control supply: The electronics use the documented 24 VDC supply and must be protected by the cabinet power design.
        • Enclosure: IP20 construction requires installation inside an enclosure that provides the necessary environmental and access protection.
        • Cable separation: Relay load wiring is routed separately from Ethernet and low-level control circuits where the cabinet rules require it.
        • Grounding: Protective bonding, reference conductors, and shield treatment follow the HIMatrix installation instructions.
        • Commissioning: Every relay path is tested from the safety application through the contact and connected final device before release to service.

        Remote safety loads served by F2 DO 8 01

        • Shutdown valves: Relay channels operate solenoids or interposing circuits that move process valves to the defined safe position.
        • Motor isolation: Contactors and motor starters can be tripped when the external switching circuit stays within the relay rating.
        • Burner equipment: Burner-management projects use the block for fuel shutoff, ignition permissive, and protective trip circuits.
        • Alarm devices: Audible and visual warning circuits can be switched from a remote HIMatrix node close to the protected equipment.
        • Machine actuators: Safety-related machine projects use the outputs for brakes, contactors, and other discrete final elements.
        Description
        For remote safety switching in HIMA HIMatrix networks, F2 DO 8 01 is a relay output module with eight channels for supported AC or DC loads outside a central controller rack.

        Two 100Base-TX Ethernet ports connect F2 DO 8 01 to safeethernet line or ring-style networks. Output diagnostics and the safety application coordinate the required de-energized state when a fault is detected.

        Protected-cabinet use of F2 DO 8 01 requires the load type, contact voltage and current, external protection, conductor routing, 24 VDC module supply, network cycle time, and operating environment to remain within the supported design.
        Alternative Names
        HIMA F2 DO 8 01 HIMatrix F2 DO 8 01 F2DO801 F2-DO-8-01 F2 DO8 01 F2 DO 8 O1 F2 D0 8 01 F2DO8O1
        Technical notes
        F2 DO 8 01 provides eight safety relay outputs, dual safeethernet ports, cabinet mounting, and channel diagnostics for remote switching.
        Exceptional Service

        Our Mission

        • 100% Satisfaction

          We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.

        • Trust Guaranteed

          Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.

        • Expertise

          Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

        FAQS

        The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
        VIEW ALL FAQS
        Which loads can F2 DO 8 01 switch?
        F2 DO 8 01 provides eight relay outputs for documented AC or DC loads; verify contact voltage, current, load type, and external protection.
        How does F2 DO 8 01 connect to a HIMatrix controller?
        F2 DO 8 01 uses two 100Base-TX Ethernet ports and safeethernet communication within the approved safety network.
        What happens to outputs when F2 DO 8 01 detects a fault?
        The validated safety application and module diagnostics determine the required de-energized response; each F2 DO 8 01 loop must be tested accordingly.
        How should inductive loads be handled on F2 DO 8 01?
        Use the documented suppression and external protection for inductive loads so F2 DO 8 01 relay contacts remain within their switching limits.
        What must match during F2 DO 8 01 replacement?
        During replacement, F2 DO 8 01 must match the approved HIMatrix safety project, relay-load characteristics, field wiring, network parameters, operating range, and firmware compatibility.
        How should F2 DO 8 01 be mounted?
        Install F2 DO 8 01 in a protected IP20 cabinet with documented orientation, ventilation, grounding, wiring separation, and 24 VDC supply protection.
        Which projects use F2 DO 8 01?
        F2 DO 8 01 is used for remote shutdown valves, contactors, alarms, burner devices, and machinery actuators requiring safety-related relay switching.

        You May Also Like

        Product Browsing History