Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 900R08R-0200

  • 900H02-0202 16-Point DC Digital Output Module
  • 900C72R-0100-44 ControlEdge HC900 C70R Redundant Controller CPU

All in stock · Add one and it is quoted together with the model, one shipping cost.

900R08R-0200

Honeywell 900R08R-0200 is an HC900 eight-slot I/O rack designed for redundant rack-power operation in distributed control cabinets.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 900R08R-0200

900R08R-0200Honeywell ControlEdge HC900 8-Slot I/O Rack with Redundant Power
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Honeywell
Part Number
900R08R-0200
Product Family
Honeywell ControlEdge HC900
Product Type
ControlEdge HC900 8-Slot I/O Rack with Redundant Power
Stock
1
Weight
4.422 kg
Estimated shipping dimensions
13.7 x 53.09 x 15.17 cm
Tariff Code
Please confirm the destination before shipping
Country of origin
USA
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Eight-slot capacity: organizes supported HC900 modules in a compact cabinet rack.
  • Redundant power arrangement: supports two rack-power paths when the approved architecture is installed.
  • Integrated backplane: distributes rack power and system communication across the populated slots.
900R08R-0200 is the physical and electrical foundation for an HC900 rack assembly. Reliable operation depends on compatible modules, correct slot use and sound power distribution rather than the chassis alone.

During maintenance, 900R08R-0200 should be documented before modules or power hardware are moved. Slot position, keying and connector condition provide the baseline for controlled reassembly.

Because it is discontinued, 900R08R-0200 requires lifecycle planning alongside technical checks. A later rack number should be treated as a separate configuration decision until all system and cabinet dependencies are confirmed.

Technical support: Share the controller revision, rack slot map, power hardware and observed diagnostics when requesting application review.
Honeywell 900R08R-0200 ControlEdge HC900 8-Slot I/O Rack with Redundant Power Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Independent feeds: verify each approved supply path and its protective device under operating load.
  • Common distribution: inspect rack power interfaces and backplane condition when multiple slots are affected.
  • Grounding path: preserve the cabinet protective-earth and signal-ground arrangement defined for the HC900 system.
  • Load margin: compare populated modules and power demand with the approved rack design.
  • Slot map: install every controller and I/O module in the documented rack position.
  • Connector care: inspect backplane contacts and module guides before seating hardware.
  • Compatibility context: align rack, module and firmware revisions with the supported HC900 configuration.
  • Shared symptoms: simultaneous module faults point toward rack power, grounding or backplane communication.
  • Single-slot symptoms: compare the affected slot with a known healthy location under an approved test plan.
  • Event baseline: record controller and module diagnostics before cycling rack power.
  • HC900 local I/O: houses supported modules near the controller cabinet.
  • Distributed cabinets: provides an eight-slot assembly for approved remote I/O architectures.
  • Redundant-power systems: supports rack availability where dual power paths are specified.
  • Maintenance staging: provides a controlled chassis for documented module and power checks.

Description

A redundant power arrangement distinguishes 900R08R-0200 from the standard eight-slot HC900 rack. It gives an I/O station the cabinet platform used for paired rack-power design in supported ControlEdge 900 architectures.

Across its eight module positions, 900R08R-0200 provides the shared backplane and mechanical structure that connect installed I/O modules with the controller architecture. Treating the rack as the station base helps engineers plan slot population and cabinet space as one coordinated assembly.

For existing systems built around 900R08R-0200, the rack identity matters beyond the number of slots because power arrangement, backplane generation and cabinet fit belong to the installed configuration. That distinction supports a more reliable spare-selection decision than choosing any eight-slot HC900 rack.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
UAEGE IS200VVIBH1C

Evidence Before Delivery

A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.

On siteCustomer inspection in Xiamen
Pre-deliveryIdentity & condition reviewed
“ Seeing the products, labels and inspection process in person gave us a clearer understanding of Apter Power's quality control. — Muhammad ”
May · UAE · October 2026
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study
Jim
Xiamen, ChinaBently Nevada

A Practical Bently Nevada 3500 Plan to Cut Factory Downtime

A practical factory deployment plan connecting 3300 XL proximity probes, a Bently Nevada 3500 rack, DCS/PLC systems and System 1 software to detect rotating-equipment risks earlier and support predictive maintenance.

3 LayersSensors to diagnostics
4 StepsPlanning to maintenance
“ A 3500 project starts with understanding machinery risks and maintenance needs. — Jim ”
Jim · Xiamen, China · 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

One power source on 900R08R-0200 is healthy but the rack reports unstable operation. Where should diagnosis begin?

Check both supply inputs, rack power modules, grounding and backplane seating so a shared distribution problem is separated from one source.

An HC900 module works in another rack but not in one slot of 900R08R-0200. How should the fault be separated?

Inspect the target slot and connector, verify supported module placement and compare rack diagnostics before moving additional modules.

900R08R-0200 is being removed from a live cabinet for maintenance. Which records should be captured first?

Record slot population, module keys, power connections, grounding, network or I/O links and the controller configuration associated with the rack.

A plant is evaluating 900R08R-0300 for a system that contains 900R08R-0200. What must be compared?

Compare approved HC900 compatibility documentation, cabinet dimensions, power hardware, supported modules, connectors and firmware context; do not infer direct interchangeability from the rack size.

900R08R-0200 shows intermittent module resets after cabinet cooling changes. What should be measured?

Measure supply voltage at the rack, cabinet temperature, airflow and connector condition under operating load before assigning the symptom to a module.

A stored 900R08R-0200 rack has visible dust and unknown history. Which checks are required before staging?

Inspect the backplane, slot connectors, power interfaces and chassis condition, then perform approved cleaning and bench checks before installing modules.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat