Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 900RSM-0101

  • 900H02-0202 16-Point DC Digital Output Module
  • 900C72R-0100-44 ControlEdge HC900 C70R Redundant Controller CPU

All in stock · Add one and it is quoted together with the model, one shipping cost.

900RSM-0101

Honeywell 900RSM-0101 is the HC900 redundant switch module used in a paired-controller architecture.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 900RSM-0101

900RSM-0101Honeywell Redundant Switch Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Honeywell
Part Number
900RSM-0101
Product Family
Honeywell ControlEdge HC900
Product Type
Redundant Switch Module
Stock
1
Weight
0.36 kg
Estimated shipping dimensions
3.7x14x13.6cm
Tariff Code
8537101190
Country of origin
USA
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • HC900 redundant switch module
  • Companion hardware for the paired-controller architecture
  • Rack-based redundancy path and status function
The module is part of the HC900 controller redundancy arrangement rather than a stand-alone network switch.

Compatibility depends on the rack revision, controller generation and companion redundancy hardware.

Testing should confirm normal paired operation and the approved switchover sequence.

Apter Power supports Honeywell 900RSM-0101 Redundant Switch Module with technical documents, quotations and application review.
Honeywell 900RSM-0101 Redundant Switch Module Manuals,Datasheets,Link Important Notice: Verify the complete model, hardware revision, installed-system arrangement and current Honeywell documentation before use.
  • Dedicated function: This is HC900 redundancy hardware rather than a general Ethernet switch, so its value comes from the paired-controller architecture.
  • Partner path: The module participates in the controller switchover path and should be interpreted with partner status rather than as an isolated communications device.
  • Rack dependency: Backplane routing and the assigned module position are part of the function, making the documented rack layout essential.
  • Diagnostic context: Controller and module indications together show whether an abnormal state belongs to the switch path, a controller partner or the rack interface.
  • Controller generation: The paired controllers need to belong to the architecture supported by the installed rack and switch module.
  • Rack revision: Mechanical fit alone is insufficient because backplane routing and redundancy behavior can change with the rack design.
  • Power availability: Both controller paths need stable power before a switchover result can be attributed to the redundancy module.
  • Firmware baseline: Partner firmware and configuration should be aligned so that a hardware test is not obscured by a software-level difference.
  • Normal-pair baseline: Establishing stable operation on both controllers gives the test a known starting condition and prevents an existing partner fault from distorting the result.
  • Controlled transition: A project-approved switchover should transfer control without unresolved partner or communication diagnostics, demonstrating continuity through the intended redundancy path.
  • Return path: Restoring the original controller path confirms that both directions of the redundancy arrangement remain functional.
  • Fault isolation: If the transition fails, comparing controller, rack and switch-module indications helps narrow the affected segment before hardware is changed.
  • Paired-controller operation: The module supports HC900 architectures that coordinate two controllers through the documented redundant rack.
  • Switchover testing: Maintenance teams can use project-approved transitions to demonstrate the integrity of the controller partner path.
  • Redundancy diagnostics: Combined controller and module status helps locate whether a degraded state belongs to a partner, rack interface or switch path.
  • Process-control continuity: The hardware serves systems where a coordinated controller transition is part of the approved availability strategy.

Description

As part of the HC900 paired-controller architecture, 900RSM-0101 provides the dedicated redundant switch function rather than general Ethernet switching.

Because it participates in the redundancy path, 900RSM-0101 depends on the controller pair, redundant rack, power hardware and system firmware baseline as a coordinated set.

For service work, the full catalog number and rack position place 900RSM-0101 correctly in the architecture. Normal paired-controller status and the approved switchover sequence then demonstrate that the redundancy path is operating as intended.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
ChinaBently Nevada

Bently Nevada Audit: Zero Discrepancies, USD 25,000 Order

A customer verified Bently Nevada accelerometers, cables and 3500/22M modules at Apter Power. Zero discrepancies led to a USD 25,000 order paid three hours later.

3 hrsOrder to payment
$25,000Follow-up order
“ Apter Power gave us the evidence to approve the expansion with confidence. — Customer procurement manager ”
May · China · 2026
Read the full case study
Jim
ChinaSGS inspection

SGS Verification for Global Automation Procurement

Documented third-party inspection helps procurement teams evaluate supplier processes, product conformity and pre-shipment evidence before cross-border automation orders move forward.

SGS ReviewIndependent evidence
4 StepsClear verification process
“ Verification should show what was checked and how it matches the buyer’s requirements. — Jim ”
Jim · China · 2026
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Both C75 controllers are powered but the team cannot tell which one owns control; how does 900RSM-0101 help?

Its Lead and Reserve indicators identify the operating role of the left CPU-A and right CPU-B in the redundant controller rack. This gives maintenance a direct role check before planned work and prevents a powered reserve controller from being mistaken for the active Lead.

Can maintenance use 900RSM-0101 to transfer the Lead role before servicing a controller?

Yes. Honeywell provides a momentary keyed-switch position to facilitate manual failover between CPU-A and CPU-B. Use it only when the Reserve controller is healthy and the approved operating procedure allows the transfer; the switch initiates the role change but does not create a healthy partner.

Will 900RSM-0101 make a single-controller rack redundant if it is fitted into an open position?

No. The module is the interface between two C75 or C75S controllers in the dedicated redundant rack, with CPU-A on the left and CPU-B on the right. Redundancy depends on that complete paired-controller architecture, not on the RSM alone.

A host Ethernet alarm appears while Lead and Reserve indications remain normal; should 900RSM-0101 be treated as the network switch?

No. The RSM handles paired-controller status and mode control, while host Ethernet and remote-I/O communication use the controller, scanner and network hardware. Normal RSM indications therefore direct the network investigation toward those communication paths rather than the redundancy switch module.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

900B16-0001
The 900B16-0001 is a 16-channel analog output module whose outputs can be synchronized and current-limited to protect the process.
900H02-0202
Two isolated field-power groups let 900H02-0202 switch protected sinking outputs for ControlEdge HC900 actuators while retaining channel and module diagnostics.
In stock
900C72R-0100-44
Honeywell 900C72R-0100-44 is the ControlEdge HC900 C70R redundant controller CPU ordered without the configuration-software and documentation package.
In stock
900C73R-0100-44
Honeywell 900C73R-0100-44 is a ControlEdge HC900 two-port I/O scanner that connects one remote I/O rack to the redundant controller network.
In stock
900C53-0244-00
Honeywell 900C53-0244-00 is a ControlEdge HC900 I/O scanner that carries input values, output commands, and rack status between a remote I/O rack and its controller.
In stock
900A16-0103
Honeywell 900A16-0103 is a ControlEdge 900 high-level analog input module that converts 16 isolated voltage or current channels into synchronized controller data.
In stock
900R08R-0200
Honeywell 900R08R-0200 is an HC900 eight-slot I/O rack designed for redundant rack-power operation in distributed control cabinets.
In stock
900G02-0202
Honeywell 900G02-0202 is a ControlEdge HC900 sixteen-channel 24 VDC sinking digital input module arranged in two field groups.
In stock
900PSM-0101
Honeywell 900PSM-0101 monitors power-path status in an HC900 redundant power arrangement.
In stock
900RR0-0101
Honeywell 900RR0-0101 is the legacy HC900 redundant controller rack for a paired controller configuration.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat