- Connects FCP280 or FDC280 control nodes to a copper control network
- Requires the correct processor baseplate and adapter position
- Verify the installed network architecture before replacement
RH924UQ provides a copper control-network interface for supported FCP280 and FDC280 processor assemblies.
Selection must match the installed baseplate, processor generation and redundant or nonredundant network arrangement.
Before installation, confirm the adapter positions, copper network cabling and the saved control-node configuration.
Availability, condition, price, and shipping time for RH924UQ are confirmed during quotation.
Foxboro RH924UQ Copper Network Adapter Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supports documented FCP280 and FDC280 processor baseplates
- Uses a dedicated network-adapter position
- Must match the installed control-network architecture
- Provides the copper physical network interface
- Receives power through the processor baseplate
- Supports the documented paired-adapter arrangement
- Inspect baseplate connectors before insertion
- Confirm network cabling and grounding
- Verify link and node diagnostics after startup
- Copper-network connection for an FCP280 control processor
- Copper-network connection for an FDC280 field device controller
- Redundant control-network adapter arrangements on supported baseplates