Features:
- Serves as a dedicated safety node interface on the Honeywell Universal Control Network (UCN).
- Supports full 5 MBytes per second network data transmission speed.
- Features dual AC-coupled isolated UCN ports for physical communication redundancy.
The Triconex 4409 Safety Manager Module (SMM) is available in brand new original packaging, fully tested surplus, or certified reconditioned condition, supplied with factory documentation where available.
This module enables full bi-directional data exchange between Tricon safety controllers and Honeywell TDC-3000 Distributed Control Systems, handling I/O reporting, alarm routing, sequence of events tracking, and clock synchronization.
Ensure proper slot keying and power module backplane capacity (< 20W) before insertion, and verify that UCN physical coaxial cabling is connected via front panel F-connectors.
The Triconex 4409 is subject to local stock availability and lead times confirmed by the manufacturer (OEM).
Triconex 4409 Safety Manager Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Integration of Tricon safety systems into Honeywell TDC-3000 DCS environments.
- Real-time transmission of emergency shutdown (ESD) alarms to DCS consoles.
- Centralized plant sequence of events (SOE) data collection and recording.
- Includes a 4-character alphanumeric display for active SMM diagnostic codes.
- Features discrete status LEDs including PASS, FAULT, ACTIVE, LOW BATT, and SPARE RDY.
- Incorporates hardware write protection to block unauthorized changes from DCS sources.
- Equipped with 2 isolated AC-coupled UCN ports using front panel F-Connectors.
- Provides a dedicated DB-25P connector for factory RS-232 debug access.
- Supports peer-to-peer messaging across multiple UCN-connected Tricon controllers.
- Installs directly into standard Tricon Main, Expansion, or RXM chassis slots with mechanical keying protection.
- Requires less than 20 watts of power module backplane load during active network operations.
- Connects to the Honeywell UCN physical coaxial network via front panel AC-coupled F-connectors.