Features:
- MPC604 PowerPC processing with 64MB ECC-protected DRAM
- VME64 master and slave transfers with A32/A24/A16 addressing
- 64-bit-capable PMC slot plus a dedicated PCI expansion connection
For MVME2604-1141, Motorola identifies a 64MB ECC DRAM configuration using the MPC604 processor and MVME761-compatible I/O arrangement.
The board links its processor and memory domain to the PCI local bus, VME64 interface, Ethernet controller, SCSI controller, and PMC slot.
Installation planning should cover system-controller selection, VMEbus addressing, P2 signal routing, transition hardware, and forced-air cooling.
The Motorola MVME2604-1141 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2604-1141 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2604-1141 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2604-1141
- ConditionNew Original ready stock
- Product FamilyMVME2600 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bus transfer and control resources
- Address spaces: The module supports A32, A24, and A16 VMEbus addressing.
- Data widths: Master and slave transfers include D64, D32, D16, and D08 modes.
- System controller: A jumper selects the onboard system-controller function when required.
- Interrupts: Universe and Raven resources route VME and PCI interrupt activity.
Mezzanine integration details
- PMC position: One IEEE P1386.1 compatible 32/64-bit PMC slot is available.
- Rear I/O: PMC rear signals depend on the VME64 extension connector arrangement.
- Carrier option: The PCI expansion connector supports compatible PMC carrier hardware.
- Power budget: Include the PMC load when reviewing chassis power and cooling.
Environmental operating limits
- Entry air: Operation requires 0 to 55 °C entry air with forced-air cooling.
- Storage: The documented nonoperating temperature range is -40 to 85 °C.
- Air path: Do not obstruct airflow across the processor, memory, and PMC area.
- Chassis check: Confirm fan performance after every module or mezzanine change.