Features:
- 16 MHz MC68030 with 4 MB shared DRAM
- SCSI interface without onboard Ethernet
- Four serial ports and A32/D32 VMEbus operation
Motorola MVME147-010A is documented as a 16 MHz, 4 MB, non-parity configuration with SCSI and no Ethernet.
MVME147-010A supplies processor, storage-control, serial, parallel, and system-controller resources for established 6U VME installations.
Match the complete A-suffix label, firmware, memory map, P1/P2 backplanes, transition module, jumper settings, and cooling before commissioning.
The Motorola MVME147-010A MPU VMEmodule may be sourced with official documentation and application-matching support from Apter Power.
Motorola MVME147-010A MPU VMEmodule Manuals, Datasheets, Links
Motorola MVME147-010A MPU VMEmodule Specs
General
- ManufacturerMotorola VME
- ModelMVME147-010A
- ConditionNew Original ready stock
- Product FamilyMVME147 Family
Onboard processing and memory resources
- Processor: Microprocessor: MC68030 operating at 16 MHz.
- Processor 2: Floating-point support: MC68882 coprocessor.
- Main memory: Shared DRAM: 4 MB without parity for this ordering code.
- Backup memory: Nonvolatile resources: Four 32-pin ROM sockets and battery-backed static RAM.
Backplane and peripheral connections
- VMEbus: VMEbus operation: A32/D32 master functions with A24/D16 support.
- Serial communication: Serial communication: Four multiprotocol serial ports routed through P2.
- SCSI: Mass storage: SCSI controller with DMA capability.
- Parallel I/O: Parallel interface: Centronics-compatible printer port.
Chassis and commissioning checks
- Backplane: Backplane: Use the specified P1 and P2 connections.
- Cooling: Cooling: Provide forced-air cooling within the documented operating limit.
- ROM resources: Configuration: Verify system-controller and ROM jumper settings before power-up.
- Serial communication: Cabling: Confirm transition-module connections for serial, SCSI, and parallel I/O.