Features:
- 200 MHz MPC603 processor configuration
- 64MB ECC-protected DRAM
- Ethernet, two PMC slots, and a debug port
For MVME2303, Motorola pairs 64MB ECC DRAM with the documented 200 MHz MPC603 platform. This configuration sits between the lower- and higher-memory options.
The processor module provides Ethernet communication, two PMC expansion sites, a debug interface, flash resources, and VMEbus connectivity for compatible embedded systems.
Before selection or installation, compare memory requirements, PMC hardware, boot firmware, front-panel I/O, P1/P2 backplane connections, slot clearance, and forced-air cooling.
Documentation, configuration review, and quotation assistance for the Motorola MVME2303 VME Processor Module are available from Apter Power.
Motorola MVME2303 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2303 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2303
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Expanded 64MB ECC memory profile
- Processor: At the center of the module is a 200 MHz MPC603 for MVME2303.
- Main memory: The installed memory resource is 64MB ECC DRAM.
- Firmware: Five megabytes of flash support boot firmware and the software resources retained on the processor module.
- Board role: The 64MB configuration integrates local computing with the family's PCI-to-VME expansion path.
Network and PMC resource layout
- Ethernet: The 64MB MVME2303 build retains the family's integrated Ethernet communication path.
- PMC sites: MVME2303 offers a pair of PMC sites for adding compatible communication or I/O resources.
- Debug port: The debug interface on MVME2303 provides a direct path for supported board-level maintenance.
- VMEbus: The backplane interface carries transfers between MVME2303 and the wider VME equipment set.
MVME2303 integration checks
- Board format: Reserve a compatible double-high VME slot with the documented P1/P2 backplane connections.
- Front-panel I/O: Ethernet and debug access use the documented RJ45 connectors on the module.
- PMC clearance: Check slot space and connector alignment for each installed PMC option.
- Configuration match: Confirm 64MB ECC DRAM, firmware, peripheral support, and forced-air cooling for MVME2303.