Features:
- Official old ordering code associated with MVME55006E-0163R
- 1 GHz MPC7457 and 512MB PC133 ECC SDRAM
- IEEE handles 6E with a documented weight of 0.43 kg
The complete MVME55006E-0163 code selects the former 0.43 kg IEEE-handle 6E build that the ordering table associates with MVME55006E-0163R.
Its dual-PCI architecture links the processor and ECC memory subsystem to PMC expansion, Universe II VME64, network interfaces, and nonvolatile board resources.
A field replacement should be checked for IEEE ejector compatibility, P2 accessory wiring, PMC loading, software image, VME mapping, and the specified airflow path.
Configuration review and procurement assistance for the Motorola MVME55006E-0163 NXP MPC7457 VME Single-Board Computer can be arranged through Apter Power.
Motorola MVME55006E-0163 NXP MPC7457 VME Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME55006E-0163 NXP MPC7457 VME Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME55006E-0163
- ConditionNew Original ready stock
- Product FamilyMVME5500 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Compute platform details
- Host processor: The PowerPC MPC7457 runs at the documented clock frequency of 1 GHz.
- Host bridge: Marvell GT-64260B integrates memory control and two PCI interfaces.
- Memory protection: The 512MB SDRAM subsystem supports double-bit detection and single-bit correction.
- Boot firmware: MOTLoad resides in the board's flash resources for startup, setup, and diagnostics.
Front and rear connectivity
- Network ports: One Gigabit-capable and one Fast Ethernet interface are provided.
- PMC I/O: Supported PMC front-panel and P2 routes allow mezzanine-specific connections.
- Serial ports: The board carries two asynchronous serial channels based on 16550-compatible UARTs.
- VME functions: The controller implements the documented master, slave, arbitration, and interrupt resources.
Pre-installation review
- Part-number check: Match MVME55006E-0163 to the IEEE-handle entry before procurement.
- Mechanical clearance: Verify the 6E front panel, handles, component height, and neighboring slot space.
- Rear I/O: Confirm the correct P2 adapter and transition module for Ethernet, serial, parallel, or SCSI routing.
- Application software: Review BSP, driver, VME map, and PMC requirements before moving an existing image.