Features:
- 25 MHz MC68LC040 processor
- 1MB parity-protected DRAM
- Four IndustryPack interfaces
Motorola lists MVME162-001 with a 25 MHz MC68LC040, 1MB parity-protected DRAM, four IndustryPack interfaces, and two serial ports.
This configuration uses the VMEbus for embedded processing and modular I/O expansion while omitting both Ethernet and SCSI interfaces.
Confirm the required IndustryPack modules, A16/A24/A32 VMEbus mapping, serial configuration, jumper settings, and forced-air cooling before installation.
The Motorola VME MVME162-001 VME Embedded Controller may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Motorola VME MVME162-001 VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162-001 VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-001
- ConditionNew Original ready stock
- Product FamilyMVME162 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- DRAM: 1MB parity-protected DRAM.
- SRAM: Battery-backed static RAM.
- Firmware storage: Flash memory for monitor/debugger firmware.
- NVRAM: Battery-backed NVRAM and time-of-day clock.
VME and modular I/O connections
- Network and storage: No Ethernet or SCSI interface.
- VMEbus: A16/A24/A32 addressing.
- Serial I/O: Two serial ports.
- Expansion: Four IndustryPack interfaces.
Chassis and installation checks
- Compatibility: Verify VME chassis and backplane compatibility before insertion.
- Configuration: Confirm jumper and system-controller settings against the Motorola manual.
- Cooling: Maintain an operating range of 0°C to +70°C with forced-air cooling.
- Handling: Use antistatic precautions and remove chassis power before installation.