Features:
- 333 MHz MPC604R module
- 64MB error-correcting DRAM
- IEEE 1101 handle and PMC support
MVME2304-0133 selects the 64MB ECC DRAM level for the 333 MHz MPC604R platform and specifies an IEEE 1101 handle.
Network, mezzanine, debug, flash, and VMEbus functions surround the processing core, giving the module multiple integration paths in a VME chassis.
Use the complete "0133" suffix to preserve both memory capacity and handle type; application firmware, PMC cards, slot hardware, and cooling still require verification.
The Motorola MVME2304-0133 VME Processor Module can be quoted by Apter Power with documentation and system-matching support.
Motorola MVME2304-0133 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2304-0133 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2304-0133
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
64MB IEEE-front-panel profile
- Processor: This variant is built around a 333 MHz MPC604R for MVME2304-0133.
- Main memory: The 64MB tier supplies 64MB ECC DRAM.
- Firmware: Boot and monitor functions are retained in the documented 5MB nonvolatile memory resource.
- Board role: For the 0133 option, the computing core and bus logic are packaged behind an IEEE 1101 handle.
Network, PMC, and debug connections
- Ethernet: MVME2304-0133 incorporates Ethernet with the IEEE-front-panel version of the 64MB board.
- PMC sites: PMC expansion for the 0133 configuration is provided through two onboard module positions.
- Debug port: Diagnostic communication with the 0133 board uses the documented service/debug interface.
- VMEbus: The 0133 option uses the standard MVME2300 backplane interface for inter-module data movement.
0133 installation alignment
- Board format: Check that the 0133 IEEE front panel and populated PMC cards fit the selected double-high slot.
- Front handle: Motorola specifies a IEEE 1101 handle for MVME2304-0133; keep that mechanical option when matching the enclosure.
- Cooling: Verify enclosure fan performance after adding PMC hardware to the MVME2304-0133 board.
- Final check: Compare the 0133 IEEE panel with the chassis and retain the correct 64MB software configuration.