Features:
- Serves as the Interface Between the Universal AC Power Source and the SK700E-151-340-A Control System
- Integrates AC/DC Power Conversion with Thermal Management and Ventilation Support
- Functions in Conjunction with NORDAC SK 700E Series Monitors and Industrial Drive Systems
The Nord SK700E-151-340-A operates as a NORDAC SK 700E frequency inverter designed for motor control applications within industrial automation environments. It continuously manages power conversion and motor speed regulation, requiring careful consideration of size, power dissipation, and permissible ambient temperature when installed in a control cabinet to prevent device failures. The SK700E-151-340-A demands sufficient ventilation to protect against overheating, with reference values specifying clearances above and below the frequency inverter: for units up to and including 22kW, above greater than 100mm and below greater than 100mm; from and including 30kW, above greater than 200mm and below greater than 200mm.
The SK700E-151-340-A provides essential power and control functions common to motor-driven systems, and is a critical component of the drive path, directly affecting the proper, normal operation of the overall automation system. Proper spacing around the SK700E-151-340-A is required depending on the power output and cabinet configuration. The SK700E-151-340-A occupies a defined mounting position in the control cabinet and is always installed in a vertical orientation with cooling ribs on the rear covered by a flat surface to ensure good convection.
For adjacent component installations, the SK700E-151-340-A system requires electrical components such as cable ducts and contactors to maintain a height-dependent minimum separation distance. This distance must be a minimum of two-thirds of the object height. For example, a cable duct measuring 60mm high requires a gap of 40mm (2/3 × 60mm = 40mm).
The SK700E-151-340-A Nord Frequency inverter may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Nord SK700E-151-340-A Frequency inverter Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Nord SK700E-151-340-A Frequency inverter Specs
General
- Manufacturer Nord
- Model SK700E-151-340-A
- Condition New Original ready stock
- Product Family SK700E-112-340-A,SK700E-152-340-A
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Conveyor Systems: Manages speed ramps to prevent component slippage and product damage.
- Material Handling: Controls accelerating forces on overhead cranes and sorting machinery.
- Packaging Machinery: Powers synchronous driving axes for precise cutting and wrapping sequences.
- Pumps and Fans: Varies flow velocity to match changing mechanical load requirements.
- Modular Integration: Connects directly with specialized fieldbus networks via internal slot expansion cards.
- CE Compliance: Conforms fully to European Low Voltage Directive guidelines.
- EMC Filtering: Features an integrated Class A line filter to minimize grid interference.
- Enclosure Protection: Holds an IP20 rating, requiring installation inside an enclosure cabinet.
- Discharge Time: Retains hazardous high voltage within internal capacitors after power disconnection.
- ESD Prevention: Uses internal components sensitive to static electricity during maintenance work.
- ISD Control: Employs sensorless vector regulation to optimize motor magnetic flux.
- High Starting Torque: Delivers stable starting forces to move high-inertia static loads.
- Overload Capacity: Withstands 150% load spikes for a duration of 60 seconds.
- Brake Chopper: Includes an integrated transistor to manage regenerative energy dissipation.
- Parameter Sets: Stores 4 independent operational profiles switchable via digital inputs.