- Use the 250 A continuous-output value at 4 kHz and 170 A value at 8 kHz for thermal sizing
- Install and power the required HAB01 fan unit; it is not an optional cooling accessory for this size
- Account for the 350 A maximum-current class, 218 W control-power demand and 1400 m³/h airflow requirement
HMS01.1N-W0350-A-07-NNNN is a Bosch Rexroth IndraDrive M HMS01 single-axis inverter power section that requires an external HAB01 fan unit.
Its 254–750 V DC-bus input supports up to 350 A maximum output, with continuous current limited to 250 A at 4 kHz and 170 A at 8 kHz.
Before load operation, verify the HAB01 fan supply and airflow direction, mechanical support, DC-bus and motor connections, control section, firmware and temperature behavior throughout the duty cycle.
Availability, condition, price, and shipping time for HMS01.1N-W0350-A-07-NNNN are confirmed during quotation.
Bosch Rexroth HMS01.1N-W0350-A-07-NNNN High-Current Single-Axis Inverter Power Section Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Install the documented HAB01 external fan arrangement
- Verify X13 supply, fan direction and diagnostic condition
- Keep cabinet inlet and exhaust paths clear at full airflow
- Allow for the 350 mm width and 31.70 kg power-section mass
- Support heavy bus and motor cables independently of terminals
- Preserve service access to the control section and fan unit
- Use only the published 4, 8 or 12 kHz operating data
- Coordinate common-bus and regenerative energy for the full lineup
- Test the worst-case thermal cycle with the HAB01 operating
- Single-axis operation in a Rexroth IndraDrive M HMS01 system
- Three-phase asynchronous motor operation
- Three-phase synchronous motor operation