- Match the 28.3 A maximum-current class with the 13.8 A continuous-output rating at 4 kHz
- Apply the 8.5 A continuous-current limit at 8 kHz and restrict selection to the documented 4 and 8 kHz frequencies
- Verify the compact HMS02 cooling path, shared DC-bus supply and separate control section before installation
HMS02.1N-W0028-A-07-NNNN is a compact Bosch Rexroth IndraDrive M HMS02 single-axis inverter power section with a 28.3 A maximum output.
Its 254–750 V DC-bus input supplies a three-phase motor output, with continuous current limited to 13.8 A at 4 kHz and 8.5 A at 8 kHz.
Before production use, verify DC-bus polarity and capacity, 17.2 m³/h cooling airflow, control section, firmware, motor feedback and low-speed torque behavior.
Availability, condition, price, and shipping time for HMS02.1N-W0028-A-07-NNNN are confirmed during quotation.
Bosch Rexroth HMS02.1N-W0028-A-07-NNNN Compact Single-Axis Inverter Power Section Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Match the HMS02 control-section and firmware identities
- Do not substitute HMS01 or W0054 from mechanical appearance
- Check the 4/8 kHz current envelope against the motor duty
- Supply the documented 254–750 V DC bus from an approved source
- Verify 24 V control power, polarity, protection and safe discharge
- Restore only the approved motor, feedback and brake parameters
- Apply the published current reduction below standstill threshold
- Confirm brake release and load torque before tuning changes
- Test rotation, low-speed torque and thermal behavior in stages
- Single-axis operation in a Rexroth IndraDrive M HMS02 system
- Three-phase asynchronous motor operation
- Three-phase synchronous motor operation