- Match the complete DKC02.3-100-7-FW type code and separately ordered firmware before replacement
- Preserve the SERCOS fiber-optic network configuration and physical topology
- Record mains, DC-bus, motor, feedback, brake and machine parameters before removal
DKC02.3-100-7-FW is a Bosch Rexroth ECODRIVE03 servo drive controller with a SERCOS fiber-optic interface.
Its complete type code identifies the DKC02 hardware series, design version, 100 A current class and voltage code 7. The FW suffix denotes separately selected application firmware.
Before installation, verify the complete nameplate, firmware, mains and DC-bus design, motor compatibility, wiring and approved commissioning file.
Availability, condition, price, and shipping time for DKC02.3-100-7-FW are confirmed during quotation.
Bosch Rexroth DKC02.3-100-7-FW ECODRIVE03 Servo Drive Controller Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Restore the documented drive address and ring order
- Verify transmit/receive fiber direction, optical power and data rate
- Match controller project, cyclic data and firmware identity
- Review the 100 A branch protection and DC-bus grouping
- Verify precharge, regeneration and internal dynamic-brake design
- Maintain the documented 48 m³/h airflow and cabinet clearances
- Reach the SERCOS operating phase before enabling motion
- Test direction, feedback and synchronization at low load
- Validate positioning, braking, current limits and full thermal duty
- SERCOS-connected synchronized multi-axis systems
- SERCOS machine-tool positioning axes
- SERCOS printing and paper-processing machine axes