Features:
- Dual-rod guidance: Resists rotation while carrying a guided linear load.
- XB11 long stroke: Extends the 10 mm bore cylinder to a 90 mm travel.
- Switch-ready body: Includes the magnet while leaving sensor selection to the application.
The exact order code combines basic body, slide bearing, bore, stroke, and made-to-order execution.
Load alignment and lateral force determine service life as strongly as supply pressure.
The long-stroke body should be checked through its full motion before production restarts.
Apter Power supports SMC CXSM10-90-XB11 quotations, official documents, and pneumatic-cylinder integration review.
SMC CXSM10-90-XB11 CXS Dual-Rod Slide-Bearing Cylinder Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Mounting surface: Use a flat rigid base and tighten fasteners evenly.
- Load connection: Avoid forcing either rod into angular or offset alignment.
- Piping: Keep ports clean and provide tubing capacity appropriate to the required speed.
- Stroke clearance: Reserve space for full travel, fittings, sensors, and maintenance access.
- Air quality: Use filtered regulated air that meets the SMC pneumatic-system requirements.
- Contamination: Shield exposed rods from chips, abrasive dust, and aggressive cleaning media.
- Temperature: Keep the cylinder and switch arrangement within their documented temperature limits.
- Condensation: Manage water in the air supply and avoid corrosive moisture at the rod seals.
- Port connection: Confirm the ordered thread and fitting arrangement before piping.
- Auto switches: Select only switches and mounting hardware approved for the CXS magnetic body.
- Flow controls: Size meter-out or other speed-control components for stable 90 mm motion.
- External guidance: Add independent guidance when side load, moment, or impact exceeds cylinder capability.
- Anti-rotation motion: Moves fixtures or tooling that must retain angular orientation.
- Compact transfer: Provides guided linear travel in constrained automation assemblies.
- Clamping and positioning: Supports controlled approach where the load remains within slide-bearing limits.
- Machine service: Restores an installed XB11 long-stroke CXS position without changing the pneumatic design.