Features:
- The short-format card installs in the intelligent slot of a compatible Castle UPS.
- Relay dry contacts present UPS operating states to a hardwired monitoring input.
- The AS400 interface is distinct from the NMC and CMC cards available for the same slot.
UPS status changes operate the card relays and alter the corresponding external contact states.
The monitoring controller reads discrete conditions rather than polling a network protocol.
Short-card construction defines the mechanical fit for the documented 1-3 kVA Castle UPS platform.
The Santak 730-80141-00P AS400 Dry-Contact Communication Card may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Santak 730-80141-00P AS400 Dry-Contact Communication Card Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Hardwired Status Interface
- Signal form: Potential-free relay contacts represent UPS conditions.
- External side: An AS400 monitoring input reads the contact states.
- Isolation: Relay construction separates the status circuits.
- Data type: The interface conveys discrete states rather than packet data.
Intelligent-Slot Installation
- Location: The card installs in the UPS intelligent slot.
- Format: The documented Castle units require the short card.
- Retention: The card body is secured inside the option position.
- Boundary: The intelligent slot supplies the internal UPS-side connection.
UPS State Signalling
- Source: UPS operating conditions drive the relay logic.
- Output: Contact changes are presented to the monitoring controller.
- Role: The interface supports external power-system supervision.
- No network stack: Status signalling does not require Ethernet communication.
Option-Card Identification
- AS400: 730-80141-00P is the short-format dry-contact card.
- NMC: The network-management card uses a different order number.
- CMC: The centralized-monitoring card is a separate option.
- Selection: The complete order number and short-card format must both match.