Features:
- One 3x3 MIMO radio links a wired Ethernet device group to a configured industrial wireless cell.
- Three R-SMA sockets separate the spatial streams used by the 2.4 and 5 GHz radio.
- Redundant 24 V DC and supported PoE modes provide alternative device-power paths.
Siemens 6GK5748-1FC00-0AA0 forwards client Ethernet frames through the associated IWLAN access point.
The antenna system attached to 6GK5748-1FC00-0AA0 determines the physical radio path for all three spatial streams.
Management and security settings on 6GK5748-1FC00-0AA0 control association, authentication, and monitored network behavior.
The Siemens 6GK5748-1FC00-0AA0 SCALANCE W748-1 RJ45 IWLAN Client may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5748-1FC00-0AA0 SCALANCE W748-1 RJ45 IWLAN Client Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Three-Stream Wireless Path
- Radio bands: Country approval and channel configuration select operation in the 2.4 or 5 GHz band.
- MIMO chain: Three spatial streams use the three R-SMA antenna connections.
- Antenna boundary: External antennas may mount directly or through cables whose losses belong in the link budget.
- Wireless modes: IEEE 802.11a/b/g/h/n support depends on the selected band and country profile.
Wired Device to IWLAN Cell
- Client role: The device joins an existing WLAN cell rather than operating as an access point.
- Ethernet handoff: The RJ45 interface forwards 10/100/1000 Mbit/s traffic from the connected wired side.
- Address handling: The client configuration manages the documented set of downstream IP addresses.
- Industrial features: iPCF and iPRP functions require the specified KEY-PLUG iFeatures option.
Authentication and Managed Access
- Wireless protection: WPA/WPA2, IEEE 802.11i, TKIP, and AES secure the configured radio connection.
- Central authentication: RADIUS and IEEE 802.1X support network-controlled access decisions.
- Management paths: HTTPS, SSH, SNMP, CLI, web management, and STEP 7 expose different service interfaces.
- Configuration storage: C-PLUG and KEY-PLUG media preserve supported device settings and licensed functions.
Supply Paths and Enclosure Boundary
- Terminal power: The four-pole terminal accepts the documented 24 V DC range with redundant supply wiring.
- PoE option: A supported IEEE 802.3af/at source can power the unit through Ethernet.
- Field signals: One digital input and one 24 V DC signaling output share the terminal interface.
- Cabinet protection: IP30 construction requires a suitable enclosure, with at least IP54 protection for the stated Zone 2 condition.