Features:
- 6GK5774-1FX00-0AA0 provides dual-band IEEE 802.11n industrial WLAN access.
- Two RJ45 ports form an integrated 10/100 Mbit/s Ethernet switch.
- PoE and redundant 24 V DC inputs provide alternative power paths.
The single-radio access point uses two external antenna paths to support its wireless link across the 2.4 GHz and 5 GHz frequency bands.
KEY-PLUG storage separates configuration retention from the base hardware and activates the SCALANCE iFeatures assigned to the device.
WLAN authentication and traffic handling are built around WPA2, IEEE 802.11i and IEEE 802.11e, keeping access protection distinct from packet prioritization.
The Siemens 6GK5774-1FX00-0AA0 SCALANCE W774-1 may be available for purchase and support from Apter Power.
Siemens 6GK5774-1FX00-0AA0 SCALANCE W774-1 Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Wireless standards and band use
- Radio Set: One WLAN radio serves the access point.
- Standards: IEEE 802.11a/b/g/h/n modes are supported.
- Band Choice: The radio operates in the 2.4 GHz and 5 GHz bands.
- Link Rate: IEEE 802.11n operation provides up to 300 Mbit/s gross.
External RF connection layout
- Sockets: Two R-SMA connectors provide the antenna interfaces.
- External Antennas: The radio paths are intended for separately connected antennas.
- Dual Paths: Both antenna connections belong to the single radio module.
- Installation Detail: Antenna cables must match the R-SMA connection format.
Wired network and power choices
- Ethernet Switch: Two RJ45 ports are combined in an internal switch.
- Port Speed: Each wired interface supports rates up to 100 Mbit/s.
- PoE Supply: Power over Ethernet can supply the access point.
- DC Backup: Two 24 V DC inputs permit a redundant feed arrangement.
Access protection and traffic control
- WPA2: WPA2 protects wireless access to the device.
- 802.11i: IEEE 802.11i supplies WLAN security functions.
- Prioritization: IEEE 802.11e supports prioritized wireless traffic.
- Configuration Key: KEY-PLUG storage retains configuration and activates iFeatures.