Features:
- One 2.4/5 GHz radio uses two external R-SMA antenna connections for 2x2 MIMO operation.
- Two RJ45 ports bridge the wireless cell to 10/100 Mbit/s industrial Ethernet.
- The unit accepts 24 V DC or PoE and stores configuration on supported C-PLUG or KEY-PLUG media.
Siemens 6GK5774-1FX00-0AB0 provides an industrial wireless access point in the U.S. regulatory domain.
Its wired ports, antenna system, and four configurable SSIDs connect separate wireless service groups to the plant network.
Management through web, CLI, or Siemens engineering tools controls radio, security, and diagnostic settings.
The Siemens 6GK5774-1FX00-0AB0 SCALANCE W774-1 RJ45 IWLAN Access Point may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5774-1FX00-0AB0 SCALANCE W774-1 IWLAN Access Point Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Dual-Band Wireless Path
- Radio count: One radio serves the selected 2.4 GHz or 5 GHz channel.
- MIMO path: Two antenna chains carry two spatial streams.
- Antenna ports: Two R-SMA connectors accept the selected external antennas.
- Cell groups: Up to four SSIDs separate configured wireless service groups.
Wired Uplink and Power
- Copper ports: Two RJ45 interfaces carry 10/100 Mbit/s Ethernet traffic.
- PoE input: One Ethernet path can supply the access point at 48 V PoE.
- DC input: The terminal connection accepts redundant 24 V DC feeds.
- Role separation: Power choice does not change the configured wireless bridging role.
Configuration and Security
- Web access: The browser interface exposes radio, network, and security settings.
- CLI access: Command-line management supports scripted configuration and diagnosis.
- Engineering tools: STEP 7 or TIA can assign device and network parameters.
- Media transfer: C-PLUG or KEY-PLUG can carry supported configuration data.
Mechanical and Environmental Placement
- DIN rail: The enclosure clips onto a standard 35 mm mounting rail.
- System rails: Adapters support S7-300 or S7-1500 rail installation.
- Wall position: Wall mounting can place the unit near antenna cable entry points.
- Ambient limit: The installed location must remain within -20 to +60 °C.