Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6GK5991-2AB00-8AA0

All in stock · Add one and it is quoted together with the model, one shipping cost.

6GK5991-2AB00-8AA0

Siemens 6GK5991-2AB00-8AA0 is a SCALANCE X MM991-2 BFOC module with two 100 Mbit/s multimode optical ports.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6GK5991-2AB00-8AA0

6GK5991-2AB00-8AA0Siemens SCALANCE X MM991-2 BFOC Optical Media Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6GK5991-2AB00-8AA0
Product Family
Siemens SCALANCE
Product Type
SCALANCE X MM991-2 BFOC Optical Media Module
Stock
1
Weight
0.3 lbs (0.136 kg)
Estimated shipping dimensions
27.55x12.03x2.23cm
Tariff Code
8517620090
Country of origin
Germany
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Two BFOC/ST connectors provide separate 100 Mbit/s multimode optical ports.
  • The 1310 nm optical paths support documented links up to 5 km.
  • The host SCALANCE switch supplies power, configuration, diagnostics, and traffic control.
Siemens 6GK5991-2AB00-8AA0 converts two host switch ports into multimode fiber links.

Transmit and receive fibers on 6GK5991-2AB00-8AA0 must be crossed correctly at each remote endpoint.

The module shares the switch identity rather than creating a separate managed device.

The Siemens 6GK5991-2AB00-8AA0 SCALANCE X MM991-2 BFOC Optical Media Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5991-2AB00-8AA0 SCALANCE X MM991-2 BFOC Optical Media Module Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Multimode Link Budget

  • Wavelength: Both ports use 1310 nm optical signaling.
  • Distance: The documented multimode path can extend to 5 km.
  • Budget: Fiber, connectors, and splices must remain within transmitter and receiver limits.
  • Duplex pair: Separate transmit and receive fibers form each full-duplex port.

Connector and Polarity

  • Sockets: Two BFOC/ST interfaces provide the optical connections.
  • Crossing: Local transmit fiber must reach the remote receive socket.
  • Cleaning: Contaminated end faces increase loss and can prevent link detection.
  • Protection: Unused optical sockets should remain capped until connected.

Switch Integration

  • Power: The SCALANCE host supplies the media module electronics.
  • Identity: The optical ports remain part of the host switch configuration.
  • Seating: The module must be fully inserted into the assigned media slot.
  • Management: Port state, traffic, and diagnostics are handled through the host device.

Optical Fault Isolation

  • No link: Verify host state, module seating, fiber polarity, and the remote optical port.
  • Low margin: Measure total path loss and inspect every connector and splice.
  • One-way traffic: Check the two fibers independently for crossing, damage, and receiver level.
  • Temperature: Keep the installed module within its 0 to 70 °C operating range.

Description

Siemens 6GK5991-2AB00-8AA0 is a SCALANCE X MM991-2 BFOC media module that adds two 100 Mbit/s multimode optical interfaces to a supported modular switch. The host switch supplies power and integrates the two ports into its managed Ethernet configuration.

Each BFOC/ST connection on 6GK5991-2AB00-8AA0 uses a 1310 nm optical path and separate transmit and receive fibers. The documented multimode budget supports links up to 5 km when fiber attenuation, connectors, and splices remain within the specified loss.

Inserted into the assigned SCALANCE media-module slot, 6GK5991-2AB00-8AA0 converts the host switch port electronics to optical signaling without creating a separate switch identity. Port configuration, diagnostics, and traffic handling remain under the host device.

The front optical sockets of 6GK5991-2AB00-8AA0 require correctly crossed transmit and receive fibers and clean BFOC end faces. Module seating, fiber polarity, optical loss, and host-port state should be checked together when a link does not establish.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
ChinaBently Nevada

Bently Nevada Audit: Zero Discrepancies, USD 25,000 Order

A customer verified Bently Nevada accelerometers, cables and 3500/22M modules at Apter Power. Zero discrepancies led to a USD 25,000 order paid three hours later.

3 hrsOrder to payment
$25,000Follow-up order
“ Apter Power gave us the evidence to approve the expansion with confidence. — Customer procurement manager ”
May · China · 2026
Read the full case study
May
Malaysia3500/22M

Malaysia Customer Collects Bently Nevada 3500/22-01-02-00 After On-Site Inspection

After equipment downtime, a Malaysian customer travelled to Xiamen to inspect and collect a Bently Nevada 3500/22-01-02-00. The unit could be tested and put into use the next day, helping shorten factory downtime and reduce associated losses.

5On-site checks
1 dayReady for testing
“ Apter responded quickly and had the right Bently Nevada module ready for us to inspect and collect. — Shah ”
May · Malaysia · October 2026
Read the full case study
Jim
ChinaSGS inspection

SGS Verification for Global Automation Procurement

Documented third-party inspection helps procurement teams evaluate supplier processes, product conformity and pre-shipment evidence before cross-border automation orders move forward.

SGS ReviewIndependent evidence
4 StepsClear verification process
“ Verification should show what was checked and how it matches the buyer’s requirements. — Jim ”
Jim · China · 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Why does 6GK5991-2AB00-8AA0 show no optical link after installation?

Check the 6GK5991-2AB00-8AA0 host slot, module seating, port enable state, fiber polarity, remote port, and connector cleanliness.

How is the 5 km limit evaluated for 6GK5991-2AB00-8AA0?

Calculate the 6GK5991-2AB00-8AA0 total fiber, connector, and splice loss against its transmitter output and receiver sensitivity.

What causes one-way communication on 6GK5991-2AB00-8AA0?

Inspect the two 6GK5991-2AB00-8AA0 fibers separately for incorrect crossing, a damaged strand, dirty BFOC end, or remote transmitter failure.

Does 6GK5991-2AB00-8AA0 need a separate network address?

No. 6GK5991-2AB00-8AA0 contributes optical ports to the host SCALANCE switch, which retains the managed device identity.

Why can 6GK5991-2AB00-8AA0 link at one end but not the other?

Compare the 6GK5991-2AB00-8AA0 remote port type, wavelength, fiber type, polarity, optical levels, host settings, and connector condition.

What should be checked before cleaning 6GK5991-2AB00-8AA0 connectors?

Disable the relevant 6GK5991-2AB00-8AA0 path, protect the eyes, use fiber-approved tools, and inspect both BFOC end faces.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6GK5991-1AF00-8AA0
The SIEMENS 6GK5991-1AF00-8AA0 is a high-performance SFP (Small Form Factor Pluggable) fiber optic transceiver.
6GK5774-1FX00-0AA0
For dual-band industrial WLAN access, Siemens 6GK5774-1FX00-0AA0 serves as a SCALANCE W774-1 RJ45 access point with switched Ethernet connectivity.
In stock
6GK5992-1AL00-8AA0
Siemens 6GK5992-1AL00-8AA0 is an SFP992-1 optical transceiver with one LC multimode 1000 Mbit/s port for fiber links up to 750 m.
In stock
6GK5307-3BM10-2AA3
Siemens 6GK5307-3BM10-2AA3 is a SCALANCE X307-3LD managed Industrial Ethernet switch that joins seven 10/100 Mbit/s RJ45 device links to three 1000 Mbit/s single-mode SC fiber links.
In stock
6GK5646-2GS00-2AC2
Built as an industrial security appliance, Siemens 6GK5646-2GS00-2AC2 protects connected Ethernet devices and networks with firewall, VPN and address-translation functions.
In stock
6GK5202-2BB00-2BA3
For real-time Industrial Ethernet networks, Siemens 6GK5202-2BB00-2BA3 is a managed SCALANCE X202-2IRT switch that connects two copper devices with two multimode fiber paths.
In stock
6GK5622-2GS00-2AC2
Siemens 6GK5622-2GS00-2AC2 is a SCALANCE SC622-2C industrial security appliance that filters traffic and separates automation network zones through firewall, routing, and NAT functions.
In stock
6GK5201-3BH00-2BA3
One copper PROFINET connection is distributed to three POF optical branches by Siemens 6GK5201-3BH00-2BA3, a SCALANCE X201-3P IRT managed switch.
In stock
6GK5208-0BA00-2AC2
Siemens 6GK5208-0BA00-2AC2 is an eight-port SCALANCE XC208 managed switch that connects and supervises Industrial Ethernet devices.
In stock
6GK5204-2BB00-2AA3
Siemens 6GK5204-2BB00-2AA3 is a SCALANCE X204-2 managed Industrial Ethernet switch that links four copper devices and two multimode fiber paths.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat