Features:
- Provides the IGD1 triggering function for SIMOVERT inverter units.
- Covers the 92 A and 146 A matched-device classes.
- Belongs to the 380–460 V AC, 510–620 V DC range.
Drive matching depends on the supply class, DC-link range and current rating as one combined selection boundary.
The 1JC1 suffix identifies this exact triggering-module revision and must remain part of the search string.
IGD1 is a dedicated inverter function and should not be confused with control, operator or communication boards in the same platform.
The Siemens 6SE7031-5EF84-1JC1 IGD1 Triggering Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SE7031-5EF84-1JC1 IGD1 Triggering Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Four checks define the intended drive class
- AC supply: Match a three-phase 380–460 V AC unit.
- Frequency: The supported line frequency is 50/60 Hz.
- DC link: Confirm the 510–620 V DC equipment range.
- Current: The listed device classes are 92 A and 146 A.
What the IGD1 identity establishes
- Function class: IGD1 is an inverter triggering module.
- Drive family: The module belongs to SIMOVERT MASTERDRIVES.
- Boundary: It is not the drive's operator or communication unit.
- Selection: Triggering-module identity and device rating must both match.
Official material and return classifications
- RoHS: The product is identified as not RoHS-compliant.
- WEEE: No take-back obligation is listed.
- Export: The classification is ECCN EAR99H / AL N.
- Catalog: The commercial catalog reference is DA65SP.
Preventing a wrong IGD1 selection
- Full code: Keep 6SE7031-5EF84-1JC1 intact.
- Compact code: 6SE70315EF841JC1 is the same article without separators.
- Suffix: Check 1JC1 rather than assuming another IGD1 revision.
- Nameplate: Compare both voltage classes and the device current.