Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6SL3210-5BB17-5AV0

All in stock · Add one and it is quoted together with the model, one shipping cost.

6SL3210-5BB17-5AV0

Siemens 6SL3210-5BB17-5AV0 is a 0.75 kW SINAMICS V20 converter for 200–240 V single-phase input with integrated Class A filter.

In Stock Ships by Monday, November 23 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6SL3210-5BB17-5AV0

6SL3210-5BB17-5AV0Siemens SINAMICS V20 Basic Converter
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6SL3210-5BB17-5AV0
Product Family
Siemens SINAMICS
Product Type
SINAMICS V20 Basic Converter
Stock
1
Weight
2.425 lbs (1.1 kg)
Estimated shipping dimensions
90 x 150 x 145.5 mm
Tariff Code
8504409999
Country of origin
China
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • A single-phase input feeds a 0.75 kW three-phase motor stage.
  • Hardwired digital and analog I/O carry local commands and status.
  • USS and Modbus RTU provide the serial command and data channel.
6SL3210-5BB17-5AV0 controls motor voltage and frequency from the selected local or remote reference.

The built-in filter, cable-length limit, and switching arrangement define the installation EMC boundary.

Vertical mounting and ambient derating maintain airflow through the compact FSA housing.

The complete order number and documented configuration of Siemens 6SL3210-5BB17-5AV0 SINAMICS V20 Basic Converter should be checked against the installed equipment.
Siemens 6SL3210-5BB17-5AV0 SINAMICS V20 Basic Converter Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Single-Phase to Motor Output

  • Line input: The converter accepts 200 to 240 V AC single-phase power.
  • Motor stage: The inverter supplies a 0.75 kW three-phase load.
  • Overload: The output can reach 150% for the documented 60-second interval.
  • Filter: A Class A filter is integrated in this exact article.

Hardwired Command Channels

  • Digital commands: Four inputs receive assigned binary functions.
  • Analog references: Two analog inputs accept configured speed or process signals.
  • Status outputs: Relay, transistor, and analog outputs report selected drive conditions.
  • Source selection: Parameters determine whether terminals or communication control the drive.

USS and Modbus RTU Setup

  • Protocol: The same serial interface supports USS or Modbus RTU.
  • Node settings: Address, baud rate, and parity must match the controller.
  • Command word: Remote run and stop states arrive through the configured protocol.
  • Reference path: The serial reference is active only when selected in parameters.

EMC and Thermal Installation

  • Shielded cable: The documented shielded motor-cable limit is 10 m.
  • Unshielded cable: An unshielded motor cable may extend to 50 m.
  • Orientation: The enclosure mounts vertically for natural airflow.
  • Derating: Output reduction applies above 40 °C ambient.

Description

Siemens 6SL3210-5BB17-5AV0 rectifies a single-phase 200–240 V supply and generates a variable-frequency three-phase motor output. Its 0.75 kW power stage follows the commanded speed while applying the configured acceleration, current, and overload limits.

Local control signals enter 6SL3210-5BB17-5AV0 through four digital and two analog inputs. Relay, transistor, and analog outputs report the selected operating states, allowing a hardwired start circuit and an analog reference to coexist with drive status feedback.

USS or Modbus RTU communication on 6SL3210-5BB17-5AV0 carries commands and operating data over the serial interface. Address, baud rate, parity, command source, and reference source must be configured together before a supervisory controller can take control.

The FSA enclosure of 6SL3210-5BB17-5AV0 mounts vertically for convection airflow and includes the documented Class A input filter. Rated output applies through 40 °C; higher ambient operation to 60 °C requires the published derating conditions.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Jim
ChinaSGS inspection

SGS Verification for Global Automation Procurement

Documented third-party inspection helps procurement teams evaluate supplier processes, product conformity and pre-shipment evidence before cross-border automation orders move forward.

SGS ReviewIndependent evidence
4 StepsClear verification process
“ Verification should show what was checked and how it matches the buyer’s requirements. — Jim ”
Jim · China · 2026
Read the full case study
Jim
Xiamen, ChinaBently Nevada

A Practical Bently Nevada 3500 Plan to Cut Factory Downtime

A practical factory deployment plan connecting 3300 XL proximity probes, a Bently Nevada 3500 rack, DCS/PLC systems and System 1 software to detect rotating-equipment risks earlier and support predictive maintenance.

3 LayersSensors to diagnostics
4 StepsPlanning to maintenance
“ A 3500 project starts with understanding machinery risks and maintenance needs. — Jim ”
Jim · Xiamen, China · 2026
Read the full case study
May
Malaysia3500/22M

Malaysia Customer Collects Bently Nevada 3500/22-01-02-00 After On-Site Inspection

After equipment downtime, a Malaysian customer travelled to Xiamen to inspect and collect a Bently Nevada 3500/22-01-02-00. The unit could be tested and put into use the next day, helping shorten factory downtime and reduce associated losses.

5On-site checks
1 dayReady for testing
“ Apter responded quickly and had the right Bently Nevada module ready for us to inspect and collect. — Shah ”
May · Malaysia · October 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Why does Siemens 6SL3210-5BB17-5AV0 ignore a terminal start command?

Check Siemens 6SL3210-5BB17-5AV0 command source, digital-input assignment, enable state, active fault, and local/remote selection.

Why cannot Siemens 6SL3210-5BB17-5AV0 communicate over Modbus RTU?

Verify Siemens 6SL3210-5BB17-5AV0 address, baud rate, parity, RS485 polarity, protocol choice, termination, and control source.

What motor-cable limits apply to Siemens 6SL3210-5BB17-5AV0?

Siemens 6SL3210-5BB17-5AV0 permits 10 m shielded or 50 m unshielded motor cable under documented conditions.

Why does Siemens 6SL3210-5BB17-5AV0 reduce available output?

Inspect Siemens 6SL3210-5BB17-5AV0 ambient temperature, airflow, mounting clearance, pulse frequency, load current, and derating settings.

Does Siemens 6SL3210-5BB17-5AV0 include an EMC filter?

Yes. Siemens 6SL3210-5BB17-5AV0 contains the documented Class A filter for its stated installation conditions.

What should be matched before replacing Siemens 6SL3210-5BB17-5AV0?

Confirm Siemens 6SL3210-5BB17-5AV0 exact power, input voltage, filter version, I/O mapping, protocol parameters, and motor data.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6SL3246-0BA22-1PA0 V4.7
Siemens 6SL3246-0BA22-1PA0 V4.7 is a SINAMICS G120 CU250S-2 DP control unit with PROFIBUS, encoder interfaces and integrated safety functions.
In stock
6SL3120-1TE21-8AA3
Siemens 6SL3120-1TE21-8AA3 is a SINAMICS S120 booksize Single Motor Module with 600 VDC input and 400 V three-phase, 18 A output.
In stock
6SL3985-6TM00-0AA0
Siemens 6SL3985-6TM00-0AA0 is a Siemens industrial automation component ordering reference requiring complete official-document and nameplate verification.
In stock
A5E00296878
Siemens A5E00296878 is a Siemens industrial automation component ordering reference requiring complete official-document and nameplate verification.
In stock
6SL3120-1TE13-0AD0
Siemens 6SL3120-1TE13-0AD0 is a Siemens industrial automation component ordering reference requiring complete official-document and nameplate verification.
In stock
6SE6420-2UC17-5AA1
Siemens 6SE6420-2UC17-5AA1 is a MICROMASTER 420 variable frequency drive for 0.75 kW motors on 200–240 V AC supplies.
In stock
6SL3225-0BE27-5AA1
Siemens 6SL3225-0BE27-5AA1 is a SINAMICS G120 PM250 regenerative power module that drives three-phase motors from a 380–480 V supply at 11 kW low overload or 7.5 kW high overload.
In stock
6SL3352-6TG33-3AA3
A 500–690 V motor-module configuration uses Siemens 6SL3352-6TG33-3AA3 as its 330 A SINAMICS S replacement control-interface hardware.
In stock
6SL3100-1AE31-0AB1
For a SINAMICS S120 booksize DC link, Siemens 6SL3100-1AE31-0AB1 is a braking module that sends excess regenerative energy to an external braking resistor.
In stock
6SL3544-0FA20-1PA0
Siemens 6SL3544-0FA20-1PA0 is a SINAMICS G120D CU240D DP control unit that processes PROFIBUS commands and controls the attached power module.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat