Features:
- It is a 7.5 kW PM250D power module for three-phase drive systems.
- Its PM250D topology supports energy recovery in suitable drive applications.
- The power module uses an IP65 enclosure without its separate control unit.
The module provides the power conversion stage and filtering function for a documented SINAMICS G120D field-drive arrangement.
Its overload profile should be matched to the required application acceleration, deceleration, and process duty.
Control logic and communication are provided by the separately selected compatible G120D control unit.
The Siemens 6SL3525-0PE27-5AA1 SINAMICS G120D PM250D Power Module may still be available for purchase and support from Apter Power beyond End-of-Life (EOL) by the manufacturer (OEM).
Siemens 6SL3525-0PE27-5AA1 SINAMICS G120D PM250D Power Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Power Conversion
- Power class: The module is rated at 7.5 kW.
- Supply: It accepts 380 to 480 V three-phase input at 47 to 63 Hz.
- Filter: An integrated class A line filter is specified.
Energy Recovery
- PM250D: The topology supports energy recovery under suitable drive conditions.
- Short overload: The documented capability is 200% current for 3 seconds.
- Extended overload: The documented capability is 150% current for 60 seconds.
Supply Connection
- Line input: Use the specified three-phase supply range for the module.
- Drive control: A compatible G120D control unit completes the configured drive.
- Planning: Confirm the connected motor and duty requirements before commissioning.
Enclosure Design
- Protection: The PM250D is specified as IP65 without a control unit.
- Ambient: The documented operating range is -10 to +55 °C.
- Mounting: Provide installation clearance and cable routing suitable for the field enclosure.