Features:
- ET 200SP HA Type H1 terminal block with 32 push-in terminals
- New 24 V DC load group with up to 10 A at 70 °C
- Internal reference junction for thermocouple compensation
As the Type H1 connection element, 6DL1193-6TP00-0DH1 starts a new potential group in an ET 200SP HA station and places its 32 push-in terminals at the process connection point.
The 24 V DC supply builds the new load group, while the process terminals are specified separately for up to 2 A on 6DL1193-6TP00-0DH1.
Its internal reference junction supports thermocouple temperature compensation, and the one-slot terminal block does not continue the potential group from the left.
The Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA Type H1 Terminal Block may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6DL1193-6TP00-0DH1 SIMATIC ET 200SP HA Type H1 Terminal Block Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Potential Group
- Start point: 6DL1193-6TP00-0DH1 creates a new 24 V DC potential group.
- Continuation: It does not continue a potential group from the left.
- Load group: Up to 10 A is specified at 70 °C.
Thermocouple Reference
- Reference junction: Internal compensation is provided.
- Use: The junction supports thermocouple temperature compensation.
- Terminals: 32 push-in connections are available.
Isolation Paths
- Backplane to supply: A 3,000 V DC/1 min type test applies.
- Potential groups: The documented separation is 1,500 V DC/1 min.
- Slot use: 6DL1193-6TP00-0DH1 supports one slot.
Operating Environment
- Horizontal mounting: -40 to 70 °C is specified.
- Vertical mounting: -40 to 60 °C is specified.
- Process current: Each process terminal is rated up to 2 A.