Features:
- Connects an ET 200SP backplane to PROFINET through a two-port BA 2xRJ45 switched interface.
- Coordinates up to 32 ET 200SP I/O modules and 16 ET 200AL modules in the documented station limits.
- Combines interface module, server module and BusAdapter under bundle order number 6ES7155-6AA01-0BN0.
Siemens 6ES7155-6AA01-0BN0 is the PROFINET entry point and station coordinator for a SIMATIC ET 200SP assembly.
The BusAdapter handles the two physical Ethernet ports while the interface module exchanges cyclic I/O and service data with the controller.
At the opposite end of the backplane, the included server module terminates the station after the last configured I/O slot.
The Siemens 6ES7155-6AA01-0BN0 IM 155-6 PN ST PROFINET Interface Module Bundle may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7155-6AA01-0BN0 IM 155-6 PN ST PROFINET Interface Module Bundle Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Two-port PROFINET path
- BusAdapter: BA 2xRJ45 presents two switched copper Ethernet ports.
- Line rate: Both ports use 100BASE-TX at 100 Mbit/s full duplex.
- Real-time service: IRT cycles are selectable from 250 microseconds to 4 ms.
- Redundancy role: The interface participates as an MRP client when media redundancy is configured.
Distributed I/O limits
- ET 200SP modules: A station can contain as many as 32 I/O modules.
- ET 200AL modules: The interface can additionally serve up to 16 ET 200AL modules.
- Data volume: The documented I/O address capacity is 512 bytes.
- Backplane reach: The ET 200SP backplane length is limited to 1 m excluding the interface module.
Communication and power status
- RUN: The green RUN LED reports the operating connection to the controller.
- ERROR: A red ERROR LED distinguishes faults from normal operation.
- MAINT and PWR: Maintenance status and supply voltage use separate yellow and green indicators.
- Port links: Two green LINK TX/RX LEDs correspond to the two BusAdapter ports.
Three-part bundle
- Interface module: 6ES7155-6AU01-0BN0 transfers PROFINET data to the station backplane.
- BusAdapter: 6ES7193-6AR00-0AA0 provides the two RJ45 network connectors.
- Server module: 6ES7193-6PA00-0AA0 terminates the backplane at the final slot.
- Hot swap: The documented bundle supports single hot swap within the permitted station configuration.