Features:
- A 7-inch 800 x 480 touch display presents 65,536-color machine graphics.
- Eight function keys provide physical operator input alongside the resistive touchscreen.
- A shared RS422/RS485 port links the configured PROFIBUS, MPI, or Modbus RTU network.
Siemens 6AV2123-2GA03-0AX0 combines touch and key operation in a compact Basic Panel.
The serial fieldbus port on 6AV2123-2GA03-0AX0 carries controller data defined by the WinCC project.
USB media and internal memory on 6AV2123-2GA03-0AX0 support project transfer, backup, recipes, and alarms.
Verify the complete Siemens 6AV2123-2GA03-0AX0 SIMATIC HMI KTP700 Basic DP Operator Panel article number and interface configuration before matching the installed unit.
Siemens 6AV2123-2GA03-0AX0 SIMATIC HMI KTP700 Basic DP Operator Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Operator Input and Visualization
- Touch area: The analog-resistive surface selects configured screen objects and data-entry fields.
- Function keys: Eight physical keys call the functions assigned in the runtime project.
- Display path: The TFT panel renders 800 x 480 images with 65,536 available colors.
- Backlight: Brightness is dimmable and service planning follows the documented operating-hour value.
Controller Communication Path
- Shared interface: One RS422/RS485 connection carries the selected fieldbus protocol.
- Bus settings: Address and transmission rate must match the PLC and WinCC hardware configuration.
- Termination: The panel position on the segment determines whether bus termination is enabled.
- Diagnosis: Connector wiring, cable shield, network state, and configured connection are checked together.
Runtime Memory and USB Use
- User memory: The 10 MB memory holds the compiled runtime project and its configured objects.
- Alarm scope: Alarm texts and event definitions remain part of the transferred project.
- Recipe data: Configured recipes use the panel memory and supported export or restore path.
- USB media: The host port accepts supported storage for backup and documented transfer procedures.
Front Seal and Cabinet Conditions
- Cutout: The enclosure opening follows the documented panel cutout dimensions.
- Front seal: Uniform clamping pressure is required to achieve the IP65 front rating.
- Rear space: The IP20 rear remains inside the cabinet with ventilation and cable clearance.
- Orientation: Landscape, portrait, and inclined mounting use their respective temperature limits.