Features:
- A 12-inch 1280 x 800 TFT combines 65,536-color touch operation with ten physical function keys.
- PROFIBUS DP, MPI, and Modbus RTU communication use the shared RS485/RS422 interface.
- Ten megabytes of user memory, USB media support, IP65 front protection, and WinCC Basic engineering support machine visualization.
Siemens 6AV2123-2MA03-0AX0 is a KTP1200 Basic DP key-and-touch panel for displaying process information and entering operator commands.
Its widescreen TFT, resistive touch layer, function keys, alarm resources, recipes, variables, and multilingual runtime provide the interface resources for a configured machine project.
The panel connects through PROFIBUS DP or MPI and requires the correct WinCC project, bus settings, termination, cabinet cutout, and front seal before commissioning.
The Siemens 6AV2123-2MA03-0AX0 SIMATIC HMI KTP1200 Basic DP Operator Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV2123-2MA03-0AX0 SIMATIC HMI KTP1200 Basic DP Operator Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Operator Interface Hardware
- Screen: The 12-inch TFT presents 1280 x 800 pixels and 65,536 colors.
- Touch layer: Analog-resistive input supports direct screen operation.
- Function keys: Ten physical keys can be assigned to frequently used project actions.
- Backlight: LED illumination supports the configured brightness and screen-saver strategy.
Serial Fieldbus Communication
- Physical interface: The shared RS485/RS422 connection carries the configured network.
- PROFIBUS DP: The panel can exchange visualization data with a compatible DP system.
- MPI: MPI communication is available where the configured controller and network support it.
- Commissioning check: Address, baud rate, cable, connector, and termination must match every node on the segment.
Visualization Resource Limits
- User memory: Ten megabytes store the transferred operator project.
- Screen resources: The panel supports as many as 250 configured process screens.
- Variable resources: Up to 800 process variables can be assigned in the project.
- Alarm and recipe resources: The configuration supports up to 1000 bit alarms and 50 recipes.
Cabinet Installation and Project Recovery
- Front protection: Correct panel mounting and sealing provide IP65 protection at the front.
- Rear protection: The IP20 rear must remain inside a suitable enclosure with the required clearances.
- USB media: Supported storage media up to 16 GB can be used for documented backup and restore procedures.
- Recovery preparation: Preserve the WinCC project, panel image, communication settings, recipes, and password records before replacement.