Features:
- A color resistive touch display presents project-defined process screens and alarms.
- Ethernet and RS-422/485 provide separate controller communication paths.
- USB host access supports the documented service and transfer functions.
Siemens 6AV6648-0AF11-3AX0 turns project tags into local operator displays and commands.
The configured protocol on 6AV6648-0AF11-3AX0 links screen objects to the selected controller.
A stored WinCC flexible SMART project is required to restore the intended behavior of 6AV6648-0AF11-3AX0.
The Siemens 6AV6648-0AF11-3AX0 SMART 1000 Touch Operator Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV6648-0AF11-3AX0 SMART 1000 Touch Operator Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Touch Display Operation
- Screen content: The downloaded project defines process values, alarms, buttons, and navigation.
- Touch input: The resistive surface converts an operator press into the project-assigned command.
- Color output: The TFT display uses 65,536 colors for screen elements and status distinctions.
- Replacement check: The panel project and controller tag map must be available before hardware exchange.
Controller and Service Connections
- Ethernet: The RJ45 path connects the panel to the configured Industrial Ethernet network.
- Serial path: RS-422/485 wiring carries the selected serial controller protocol.
- USB host: Supported media use the Type A connection for documented service or transfer tasks.
- Addressing: Panel and controller addresses must match the restored communication project.
Configuration and Transfer
- Engineering: WinCC flexible SMART provides the documented project environment for this panel family.
- Tag mapping: Each screen object reads or writes the controller address assigned in the project.
- Transfer path: The service connection and transfer settings must match the configured download method.
- Backup scope: Preserve screens, alarms, recipes, passwords, communication settings, and controller addresses.
Cabinet Installation Checks
- Supply: The panel requires a correctly polarized 24 V DC control supply.
- Front seal: A clean sealing surface protects the operator side after the panel is clamped in place.
- Rear clearance: Cable routing must not load the Ethernet, serial, USB, or power connectors.
- Commissioning: Verify display, touch calibration, communication, alarms, and operator commands after installation.