Features:
- A 10.4-inch resistive touch display presents configured operator screens at 800 x 600 pixels.
- An enabling control and stop pushbutton provide physical actions beside the software interface.
- Ethernet, serial and removable-media connections support several distinct data paths.
The Mobile Panel receives supply and network access through the connection arrangement selected for the installation.
Configured screens link operator touch entries to controller variables, alarms, recipes and command functions.
Safety-control wiring must be evaluated independently from HMI runtime communication and screen operation.
The Siemens 6AV6645-0BE02-0AX0 SIMATIC Mobile Panel 277 HMI may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV6645-0BE02-0AX0 SIMATIC Mobile Panel 277 HMI Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Completing the mobile panel interface
- Power entry: The panel receives its operating supply through the designated connection system.
- Data route: The installed box and cable determine which configured communication path reaches the controller.
- Safety contacts: Stop and enabling signals use their defined conductors rather than ordinary HMI data.
- Installation match: Panel, cable and connection box must be checked as one hardware set.
Moving configured values between panel and controller
- Process values: The active HMI project maps displayed fields to controller variables.
- Operator entries: Touch actions write the configured commands or values back through the selected protocol.
- Messages: Runtime conditions trigger the alarm and acknowledgment behavior defined in the project.
- Recipes: Stored data sets transfer grouped parameters without turning the memory card into live controller memory.
Keeping physical safety controls outside screen logic
- Enabling control: The physical switch supplies the documented enabling states to the safety evaluation.
- Stop action: The integrated stop pushbutton operates through its dedicated contact circuit.
- Software boundary: A touch object can request a function but cannot substitute for either safety contact path.
- Validation: Both channels and the machine-side response require a separate functional test.
Selecting a route for projects and service data
- Ethernet route: The RJ45 interface supports the configured network and transfer functions.
- Serial route: RS422 and RS485 provide distinct connections for supported controllers or project transfer.
- USB route: The USB interface supplies a separate peripheral or service-data path.
- Card storage: The combined MMC/SD slot holds supported project or runtime data on removable media.