Features:
- Four 5 V DC MOSFET outputs
- 0.1 A rated output current
- High-speed switching up to 200 kHz
The Siemens 6ES7222-1AD30-0XB0 is a SIMATIC S7-1200 SB 1222 signal board with four 5 V DC MOSFET digital outputs. The solid-state channels can operate as current-sinking or current-sourcing outputs as documented by Siemens. Rated output current is 0.1 A per channel. Switching operation up to 200 kHz supports compatible high-speed output applications.
The four outputs are arranged in one group and do not include internal short-circuit protection. Typical power loss is 0.5 W. The signal board measures 38 x 62 x 21 mm and is installed in the supported S7-1200 signal-board position. External load characteristics and protective measures must therefore be matched to the official output limits.
Use this order number when the controller requires four compact 5 V DC MOSFET outputs with the specified switching capability. Project selection should verify load current, sinking or sourcing operation, switching frequency and external protection. Wiring should follow the common-reference and cable requirements stated for the connected load. The compatible CPU and the corresponding STEP 7 hardware configuration should be confirmed before installation.
For 5 V DC MOSFET output requirements based on the 6ES7222-1AD30-0XB0, Apter Power can assist with official data, load-related selection checks and quotation support. Siemens lists product phase-out from 1 November 2026; stock and delivery timing require confirmation.
Siemens 6ES7222-1AD30-0XB0 SB 1222 Digital Output Signal Board Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7222-1AD30-0XB0 SB 1222 Digital Output Signal Board Specs
General
- ManufacturerSiemens
- Model6ES7222-1AD30-0XB0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SB 1222 Digital Output Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Digital Outputs:
- Four MOSFET solid-state outputs
- 5 V DC rated output voltage
- 0.1 A rated output current
- One group of four
Switching Data:
- Operation up to 200 kHz
- Current-sinking or current-sourcing
- No short-circuit protection
- Output-status indication
Installation Notes:
- 38 x 62 x 21 mm dimensions
- 50 m shielded cable maximum
- 35 mA typical backplane current
- Provide suitable external protection