Features:
- Eight transistor digital outputs for SIMATIC S7-1200 expansion
- 24 V DC outputs rated at 0.5 A per channel
- Diagnostic alarm and individual output-status indication
The order configuration identifies an SM 1222 signal module with eight transistor outputs arranged as eight groups of one.
Use the module where a SIMATIC S7-1200 project requires additional 24 V DC switching points for industrial actuators and control devices.
The Siemens 6ES7222-1BF32-0XB0 SM 1222 Digital Output Module is listed by Siemens as a PM300 Active Product, with product phase-out stated from 1 November 2026. Availability from Apter Power is subject to quotation and stock confirmation.
Siemens 6ES7222-1BF32-0XB0 SM 1222 Digital Output Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7222-1BF32-0XB0 SM 1222 Digital Output Module Specs
General
- ManufacturerSiemens
- Model6ES7222-1BF32-0XB0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SM 1222 Digital Output Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Digital Outputs:
- 8 transistor outputs
- 24 V DC rated output voltage
- 0.5 A rated output current
- External short-circuit protection required
Electrical Data:
- 20.4-28.8 V DC permissible supply range
- 120 mA maximum backplane-bus current
- 1.5 W typical power loss
- Diagnostic alarm supported
Installation Notes:
- 45 x 100 x 75 mm module dimensions
- IP20 degree of protection
- 500 m maximum shielded cable length
- 150 m maximum unshielded cable length