Features:
- Product: CPC-II current-to-pressure converter
- Pressure class: 10 bar
- Hazardous location: Zone 2 / Class I, Division 2
9907-1200 is a 10 bar CPC-II current-to-pressure converter for Zone 2 or Class I, Division 2 installations.
Converting an electrical command into a hydraulic pressure output.
Selection check: Conversion — Current input is converted to a proportional pressure output.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Woodward 9907-1200:
- Converting an electrical command into a hydraulic pressure output.
- Positioning turbine or process actuators that accept pressure control.
- Installing a 10 bar converter in the documented hazardous-location class.
- Conversion: Current input is converted to a proportional pressure output
- Pressure class: The ordered configuration is rated for 10 bar
- Response: Commission pressure response with the connected actuator
- Pneumatics: Use clean supply pressure within the documented limits
- Mounting: Observe orientation, drainage, and vibration requirements
- Calibration: Verify zero and span after mechanical installation
- Area: Suitable for the documented Zone 2/Class I Division 2 class
- Wiring: Apply the certified electrical installation conditions
- Pressure: Isolate and vent pressure before service