Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    The exact EJA430E-JAS4J-917EB configuration remains subject to nameplate and sourcing verification.

EJA430E-JAS4J-917EB

/ 4.9
1001 reviews | Need a Specific Revision?
Yokogawa EJA430E-JAS4J-917EB is an A-capsule gauge-pressure configuration with a 1/2 NPT process connector and local range setting for gauge-pressure measurement in process and utility systems.
In Stock
Ships by Friday, October 30
Fast Shipping Available
Get a quick price for EJA430E-JAS4J-917EB
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for EJA430E-JAS4J-917EB

  • Manufacturer:
    Yokogawa
  • Part Number:
    EJA430E-JAS4J-917EB
  • Product Family:
    Yokogawa DCS system
  • Product Type:
    Gauge Pressure Transmitter
  • Stock:
    1
  • Measurement / Function:
    gauge pressure
  • Output / Command Signal:
    4–20 mA DC with digital communication
  • Communication / Control Interface:
    HART 5/HART 7 protocol
  • Selected Span / Torque Class:
    0.03 to 3.5 MPa (4.3 to 500 psi)
  • Configurable Range / Travel:
    -0.1 to 3.5 MPa
  • Process / Pneumatic Connection:
    1/2 NPT female process connector
  • Wetted / Service Materials:
    S-code wetted assembly with Hastelloy C-276 diaphragm
  • Bolting / Mechanical Interface:
    B7 carbon steel bolts and nuts
  • Installation Arrangement:
    Horizontal piping with left-side high pressure
  • Housing:
    Cast aluminum amplifier housing
  • Electrical Connection:
    1/2 NPT female, two entries with blind plug
  • Local Indicator:
    Digital indicator with range-setting switch
  • Mounting Hardware:
    304 SST flat 2-inch pipe bracket
  • Ordering Options:
    No additional option suffix is included in this order code.
  • Degree of Protection:
    IP66/IP67, Type 4X
  • Ambient Conditions:
    -40 to 85°C (-40 to 185°F), or -30 to 80°C with LCD
  • Process / Service Temperature:
    -40 to 120°C (-40 to 248°F)
  • Communication Load / I/O:
    a total loop-load range of 0 to 1290 Ω, with 250 to 600 Ω required for digital communication
  • Stability / Control Performance:
    Stability ±0.1% of URL for 10 years
  • Manufacturer Reference:
    Yokogawa GS 01C31E01-01EN
  • Tariff Code:
    9026201090
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Applications Safety Measurement Range Humidity Range

Features:

  • The A-capsule connector configuration with local range setting uses the 0.03 to 3.5 MPa (4.3 to 500 psi) capsule, horizontal piping with left-side high pressure and 1/2 NPT female, two entries with blind plug.
  • The A-capsule connector configuration with local range setting provides 4–20 mA DC with digital communication through HART 5/HART 7 protocol, with digital indicator with range-setting switch.
  • The A-capsule connector configuration with local range setting combines 1/2 NPT female process connector, S-code wetted assembly with Hastelloy C-276 diaphragm and 304 SST flat 2-inch pipe bracket.
The EJA430E-JAS4J-917EB suffix sequence selects A capsule with range-setting indicator and 1/2 NPT connector within the EJA430E platform.

It converts gauge pressure into a control-system signal and supports configuration or diagnostic access through HART 5/HART 7 protocol.

Confirm local range switch, connector size or A capsule before accepting the unit as a mechanical, electrical or functional replacement.

Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Yokogawa EJA430E-JAS4J-917EB: Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • The A-capsule connector configuration with local range setting measures gauge pressure in process lines, vessels and utility systems handling compatible liquids, gases or steam.
  • The A-capsule connector configuration with local range setting supports pump discharge, header and equipment-pressure control where the selected pressure assembly is suitable.
  • The A-capsule connector configuration with local range setting supplies pressure feedback for control, monitoring or protective logic through an engineered instrument loop.
  • For safety, isolation and depressurization are required before disturbing the 1/2 NPT female process connection.
  • When reviewing safety, wetted-material compatibility must be confirmed for S-code wetted assembly with Hastelloy C-276 diaphragm to prevent leakage or diaphragm damage.
  • In the documented safety context, no approval-specific option suffix is included; use the exact nameplate and base documentation to determine the applicable limits.
  • The selected capsule has a calibrated span of 0.03 to 3.5 MPa (4.3 to 500 psi) and an allowable configurable range of -0.1 to 3.5 MPa.
  • When reviewing measurement range, zero may be elevated or suppressed only while both range endpoints remain inside the official capsule limits.
  • In the documented measurement range context, range selection must consider expected pressure, overpressure, process temperature and the horizontal piping with left-side high pressure zero shift.
  • For humidity range, the transmitter family is specified for 0 to 100% relative humidity when covers and cable entries are correctly sealed.
  • When reviewing humidity range, condensation control depends on maintaining the IP66/IP67, Type 4X enclosure and using an approved conduit sealing method.
  • In the documented humidity range context, the 1/2 NPT female, two entries with blind plug entry must prevent moisture migration into the terminal compartment during outdoor operation.
Description
EJA430E-JAS4J-917EB specifies a complete EJA430E gauge pressure transmitter configuration, including A capsule with range-setting indicator and 1/2 NPT connector. The full code is required for an exact match.

It converts gauge pressure into a control-system signal and supports configuration or diagnostic access through HART 5/HART 7 protocol. The configuration is intended for gauge-pressure monitoring on process lines, vessels and utility equipment when the process and installation limits are satisfied.

A replacement should be selected from the complete nameplate rather than the base series alone. Confirm local range switch, connector size or A capsule, along with the process and site requirements.
Alternative Names
EJA430E-JAS4J-917EB Yokogawa EJA430E-JAS4J-917EB EJA430E JAS4J 917EB EJA430EJAS4J917EB Yokogawa EJA430E Gauge Pressure Transmitter Yokogawa EJA430E-JAS4J-917EB Gauge Pressure Transmitter Yokogawa DPharp EJA EJA430E-JAS4J-917EB
Technical notes
After any local range-setting operation, verify loop scaling at the control system and confirm that the 1/2 NPT connector remains mechanically supported and leak-tight.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Which process connector is selected on EJA430E-JAS4J-917EB?
The order includes a 1/2 NPT female process connector rather than leaving the 1/4 NPT cover-flange port as the final external interface.
What must match the range-setting display of EJA430E-JAS4J-917EB during integration?
Plant configuration controls and HART procedures must allow the selected local range-setting switch while preserving authorized lower and upper range values.
How can EJA430E-JAS4J-917EB be used at a locally ranged gauge-pressure point?
It provides gauge-pressure measurement with a local digital display and range-setting switch for duties that fit the A capsule and 1/2 NPT process interface.
What connector condition should be verified on an available EJA430E-JAS4J-917EB?
Ask for photographs confirming clean 1/2 NPT threads and an undamaged sealing path, and require disclosure of any previously applied sealant or process exposure.
What adapter risk arises if EJA430E-JAS4J-917EB is replaced with the no-connector version?
The external interface changes back to the cover-flange port, so the existing tubing may not align and an added adapter could affect support, leak paths and installation length.
What connection evidence should be included in an EJA430E-JAS4J-917EB price inquiry?
Send a clear process-connector photograph, mating thread specification and installed bracket view, and request the corresponding EJA430E documentation with the offer.