Features:
- Compact transistor I/O: Six inputs and four transistor outputs support small machines.
- Single Ethernet: The onboard interface supports engineering and approved communication services.
- Basic CPU platform: One option-board slot allows limited, planned extension.
This basic AC500-eCo V3 CPU integrates small-machine digital I/O and Ethernet in a compact 24 V DC processor.
Its transistor outputs suit approved DC loads, while an optional board can add a required function within the supported architecture.
Confirm output current, terminal-block package, option board, RTC needs, network settings, and project size before installation.
The ABB PM5012-T-ETH Basic AC500-eCo V3 Processor Module is listed as Active / Available from OEM; quotations and sourcing support may be available through Apter Power.
ABB PM5012-T-ETH Basic AC500-eCo V3 Processor Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB PM5012-T-ETH Basic AC500-eCo V3 Processor Module Specs
General
- ManufacturerABB
- ModelPM5012-T-ETH
- ConditionNew Original ready stock
- Product FamilyABB AC500-eCo V3
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Small-controller selection
- I/O fit: Confirm six inputs and four outputs cover the approved machine.
- Program fit: Check the compiled application and retained-data demand.
- Expansion: Reserve the single option slot for the highest-priority function.
- Panel space: Plan terminals, cable fixing, and service clearance.
DC output preparation
- Load current: Match every channel to ABB output limits.
- Polarity: Verify field supply and common wiring.
- Protection: Use the approved external protection for connected loads.
- Test: Commission outputs individually with the machine safe.
Timekeeping decision
- Requirement: Decide whether the application needs a maintained real-time clock.
- Option board: Use the approved TA5131-RTC when required.
- Time source: Document synchronization and timezone handling.
- Recovery: Verify timestamps after power and project restoration.