Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power supports quotations, base-variant checks, and AC500 hardware matching for TB511-ETH requests.

TB511-ETH

/ 4.9
1001 reviews | Need a Specific Revision?
ABB TB511-ETH is an AC500 terminal base with one processor slot, one communication-module slot, Ethernet, and two serial interfaces.
In Stock
Ships by Thursday, October 29
Fast Shipping Available
Get a quick price for TB511-ETH
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for TB511-ETH

  • Manufacturer:
    ABB
  • Part Number:
    TB511-ETH
  • Product Family:
    ABB AC500
  • Product Type:
    Ethernet Terminal Base
  • Stock:
    1
  • Processor Slots:
    1
  • Communication Module Slots:
    1
  • Network Interface:
    Ethernet RJ45
  • Supply Connection:
    24 V DC via removable 5-pin spring terminal block
  • 24 V DC Supply Range:
    24 V (-15 %, +20 %)
  • Reverse Polarity Protection:
    Yes
  • Maximum Current Consumption:
    0.35 A from 24 V DC, including installed processor and communication modules
  • Fuse Melting Integral:
    Min. 1 A²s
  • Peak Inrush Current:
    55 A
  • Processor Module Interfaces:
    I/O bus, COM1, COM2, FBP
  • Ethernet CPU Interface:
    For an AC500 CPU with Ethernet interface
  • Processor Order Compatibility:
    PM57x-ETH, PM58x-ETH, or PM59x-ETH R0271 with TB5x1-ETH R0270
  • Mounting Orientation:
    Horizontal or vertical
  • Operating Temperature:
    0 to +60 °C horizontal; 0 to +40 °C vertical with output derating
  • Storage Temperature:
    -40 to +70 °C
  • Transport Temperature:
    -40 to +70 °C
  • Relative Humidity:
    Max. 95 %, without condensation
  • Operating Altitude:
    Below 2000 m; air pressure above 800 hPa
  • Storage Altitude:
    Below 3500 m; air pressure above 660 hPa
  • PLC System Protection:
    IP20 when fully assembled
  • Housing Classification:
    V-2 according to UL 94
  • Vibration Resistance:
    2 to 8.4 Hz: 3.5 mm peak; 8.4 to 150 Hz: 1 g; all axes
  • Shock Resistance:
    15 g, 11 ms, half-sinusoidal; all axes
  • Mounting Rail:
    35 mm top-hat rail, 7.5 mm or 15 mm depth
  • Screw Mounting:
    M4
  • Fastening Torque:
    1.2 Nm
  • Overvoltage Category:
    Category II
  • Pollution Degree:
    Degree 2
  • ESD Immunity:
    8 kV air; 6 kV contact
  • Radiated RF Immunity:
    10 V/m
  • Conducted RF Immunity:
    10 V
  • Weight:
    0.175 kg
  • Estimated shipping dimensions:
    9.55 x 13.5 x 2.8 cm
  • Tariff Code:
    8537101190
  • Country of origin:
    Sweden
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Processor Fit Communication Slot Interface Review

Features:

  • Processor position: The base provides one slot for an AC500 processor module.
  • Communication slot: One communication-module position is included.
  • Integrated interfaces: The ETH version provides Ethernet plus two serial RS232/RS485 interfaces.

TB511-ETH forms the mechanical and electrical base for an AC500 processor and one communication module while providing the documented network connections.

System review should record the processor order code, communication module, I/O bus, Ethernet addressing, serial port use, power arrangement, and cabinet wiring.

Procurement should verify the complete 1SAP111100R0270 code because TB511 terminal-base variants use different network interfaces.

Availability is subject to Apter Power's current inventory and sourcing confirmation.

ABB TB511-ETH Ethernet Terminal Base Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

ABB TB511-ETH Ethernet Terminal Base Specs

General

  • ManufacturerABB
  • ModelTB511-ETH
  • ConditionNew and factory sealed
  • Product FamilyAC500 Terminal Bases

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

CPU arrangement review

  • Processor slot: TB511-ETH provides one processor-module position.
  • CPU identity: Record the installed AC500 processor order code and revision.
  • Bus interfaces: Preserve I/O bus and processor interface connections.
  • Mechanical check: Inspect connectors and base engagement before installing the processor.

Module-position planning

  • Slot count: One communication-module slot is available.
  • Module identity: Verify the installed communication module separately.
  • Project record: Preserve the AC500 hardware configuration and communication settings.
  • Power budget: Review the connected module arrangement within ABB system requirements.

Ethernet and serial checks

  • Ethernet: Confirm that the required terminal-base variant uses the RJ45 interface.
  • Serial ports: Document the two RS232/RS485 interface assignments.
  • Addressing: Preserve network addresses, protocol parameters, and peer-device records.
  • Cabling: Verify pin assignments, shielding, termination, and cabinet routing.
Description

The ABB TB511-ETH is an AC500 terminal base with order code 1SAP111100R0270 for one processor module and one communication module.

Official documentation for TB511-ETH specifies an Ethernet RJ45 interface and two serial RS232/RS485 interfaces in the terminal-base arrangement.

Before ordering 1SAP111100R0270, verify the processor, communication module, Ethernet requirement, serial wiring, connectors, and complete base label.

Alternative Names
ABB TB511-ETH TB511-ETH TB511 ETH TB511ETH 1SAP111100R0270 ABB 1SAP111100R0270 AC500 TB511-ETH terminal base ABB AC500 Ethernet terminal base
Technical notes
ABB TB511-ETH provides one processor slot, one communication-module slot, Ethernet, and two RS232/RS485 serial interfaces. Verify 1SAP111100R0270.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What is ABB TB511-ETH used for?
It provides the AC500 base for one processor module and one communication module, with Ethernet and serial interfaces.
Which product family includes TB511-ETH?
TB511-ETH belongs to ABB AC500 terminal bases. Verify the installed processor and communication module as separate order codes.
How do I confirm the correct TB511-ETH?
Match TB511-ETH and 1SAP111100R0270 on the base label and official ordering table, then confirm the RJ45 Ethernet variant.
How many module positions does TB511-ETH provide?
ABB specifies one processor-module slot and one communication-module slot. The connected modules must be verified independently.
Is TB511-ETH active or discontinued?
ABB identifies this order code in the Classic lifecycle phase, not as discontinued. Availability is subject to sourcing confirmation.
Is an official replacement identified for TB511-ETH?
The reviewed ABB datasheet does not identify a replacement. Another terminal base must not be assumed compatible from appearance alone.
Where can I get the TB511-ETH datasheet and a quote?
Use the verified PDF in Manuals and send Apter Power the installed CPU, communication module, quantity, condition, and destination.

Product Browsing History