Features:
- 8 MB controller: The configuration supports compact AC500 V3 control projects.
- Dual Ethernet: Two independent Ethernet interfaces support approved controller services.
- Serial and CAN: A configurable RS-232/485 port and one CAN interface are integrated.
This entry AC500 V3 CPU combines dual Ethernet, serial communication, CAN, and local diagnostics for compact modular systems.
It is intended for use with a dedicated TB56xx-2ETH terminal base and can coordinate local I/O plus approved communication modules.
Verify application size, terminal-base compatibility, network roles, serial mode, CAN settings, and required runtime licenses before commissioning.
The ABB PM5630-2ETH AC500 V3 Processor Module is listed as Active / Available from OEM; quotations and sourcing support may be available through Apter Power.
ABB PM5630-2ETH AC500 V3 Processor Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB PM5630-2ETH AC500 V3 Processor Module Specs
General
- ManufacturerABB
- ModelPM5630-2ETH
- ConditionNew Original ready stock
- Product FamilyABB AC500 V3
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Terminal-base compatibility
- Base family: Use only the dedicated TB56xx-2ETH architecture specified by ABB.
- Slot count: Choose the base by required communication-module capacity.
- Connectors: Inspect Ethernet, serial, CAN, and supply terminals before assembly.
- Seating: Verify the CPU is fully latched before energizing.
Application fit review
- Memory fit: Confirm the compiled application and web content fit the CPU resources.
- I/O count: Document central and remote channels before selection.
- Protocol scope: Enable only the Ethernet and CAN services required by the design.
- Future growth: Reserve base and communication capacity for approved expansion.
Initial startup sequence
- Supply: Verify the 24 V DC source, polarity, and protection.
- Project: Load the validated target and confirm firmware compatibility.
- Networks: Test Ethernet, serial, and CAN separately.
- Diagnostics: Resolve display and status indications before machine release.