Features:
- Exact ABB configuration: 1SAP121100R0001 identifies the documented AC-powered mixed digital and analog control variant.
- Integrated local I/O: 6 digital inputs, 6 relay outputs, 2 analog inputs, and 1 analog output are provided for compact automation.
- AC500-eCo integration: The processor connects to the approved controller and expansion architecture.
PM564-RP-AC combines 128 kB program memory with 6 digital inputs, 6 relay outputs, 2 analog inputs, and 1 analog output in the documented 100-240 V AC configuration.
Digital and analog channels share a compact controller, so signal ranges, scaling, grounding, and relay duty must remain aligned with the approved design.
Review the project archive, terminal package, power protection, channel map, connected loads, and safe acceptance procedure before exchange.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
PM564-RP-AC Manuals, Datasheets, and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
PM564-RP-AC AC500-eCo AC Mixed-I/O Processor Specifications
General
- ManufacturerABB
- ModelPM564-RP-AC
- ConditionNew Original ready stock
- Product FamilyABB AC500
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Supply and isolation checks
- Configuration: Match the complete ABB article and supply variant.
- Project: Preserve the verified application and retained data.
- Terminals: Confirm every required pluggable terminal block.
- Drawings: Use the approved field-wiring and panel documents.
Mixed-signal preparation
- Channel map: Record every input and output assignment.
- Relay duty: Check load category, current, protection, and switching rate.
- Signal integrity: Confirm analog range, scaling, grounding, and shielding.
- Diagnostics: Capture channel symptoms before changing hardware.
Safe startup sequence
- Supply: Verify voltage, protection, polarity, and isolation.
- Download: Load only the verified project and compatible firmware.
- I/O test: Exercise channels in a controlled sequence.
- Handover: Archive final settings and acceptance results.