Features:
- Compact bundle range: Supports cable bundles from 1.5 to 16 mm in diameter.
- Stainless-steel barb: A 316 stainless-steel locking barb retains the tie without an all-plastic pawl.
- 100-piece pack: TB100 is the standard-pack form associated with TY23M.
TB100 (TY23M) is sized for compact wire groups in control panels, machine wiring and equipment harnesses.
Its low-profile 92 mm length limits unused tail material where terminal density and service access matter.
The ABB model and pack identity should remain together on RFQs so a bulk TY23M pack is not substituted unintentionally.
Apter Power can assist with quotation and documentation support for the ABB TB100 (TY23M) Ty-Rap Cable Tie.
ABB TB100 (TY23M) Ty-Rap Cable Tie Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Bundle range: Use with cable bundles from 1.5 to 16 mm in diameter.
- Tie length: The 92 mm body suits compact wiring paths and terminal spaces.
- Retention class: The minimum loop tensile strength is 80 N.
- Pack identity: TB100 is the 100-piece pack mapped to the TY23M tie specification.
- Tie body: Natural polyamide 6.6 provides the flexible cable-contact surface.
- Locking element: The locking barb is 316 stainless steel.
- Flammability: The material classification is UL 94 V-2.
- Material boundary: Do not replace it with an all-plastic locking design without approval.
- Full order identity: Specify ABB TB100 (TY23M) on the RFQ.
- Pack check: State the 100-piece requirement rather than ordering TY23M by name alone.
- Project record: Retain the approved bundle range and tensile class with the cable schedule.
- Receiving check: Compare the ABB code, colour and pack quantity before releasing stock.
- Control panels: Organises compact conductor groups near terminal blocks.
- Machine wiring: Secures low-profile harness runs where excess tie length is undesirable.
- Equipment service: Supports like-for-like replenishment of an approved Ty-Rap specification.
- Harness preparation: Provides a repeatable 80 N retention class for small cable bundles.