- Customer I/O power supply identified for the ABB IRC5 controller platform
- Provides 24 VDC through terminal XT31 for documented IRC5 I/O and conveyor-tracking equipment
- Maximum of two DSQC 609 units may be connected in parallel under ABB's documented arrangement
DSQC 609 3HAC14178-1 is the customer I/O power supply identified in ABB's IRC5 product manual and controller spare-parts documentation.
ABB documents its 24 VDC supply connection through terminal XT31 for DeviceNet I/O units, gateways, encoder interface units, and the DSQC 2000 CTM-01 conveyor tracking module, including the module's main and optional camera power inputs.
ABB permits no more than two DSQC 609 units in parallel and states that adjacent customer I/O power supplies must be separated with three exterior supports to prevent overheating. Confirm the complete 3HAC14178-1 identity, DIN-rail mounting, terminal wiring, and installed IRC5 configuration before replacement.
Availability, condition, price, and shipping time for DSQC 609 3HAC14178-1 are confirmed during quotation.
ABB DSQC 609 3HAC14178-1 Customer I/O Power Supply Datasheet, Manuals, and Support Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Read 3HAC14178-1 directly from the installed product label.
- Confirm that the same label also carries the DSQC 609 designation.
- Reject a visually similar supply whose complete ABB number differs.
- Confirm the power position belongs to the documented IRC5 controller generation.
- Compare the installed mounting points before disturbing the existing unit.
- Verify that surrounding controller hardware matches the recorded cabinet arrangement.
- Isolate the controller using the applicable ABB safety procedure.
- Record every conductor and connector before removal.
- Complete ABB IRC5 power-up and diagnostics after the installation is checked.
- ABB DSQC 609 3HAC14178-1 provides 24 VDC power through terminal XT31 for IRC5 DeviceNet I/O units.
- ABB DSQC 609 3HAC14178-1 supports the 24 VDC supply arrangement for IRC5 gateways and encoder interface units connected through terminal XT31.
- ABB DSQC 609 3HAC14178-1 supplies 24 VDC through terminal XT31 to the DSQC 2000 CTM-01 conveyor tracking module, including its X1 main power inlet and optional X20 camera power inlet.