Features:
- 400 MHz MPC604 processor with 128MB ECC DRAM
- IEEE 1101 compatible front panel and 9MB Flash
- PowerPlus VME architecture with PCI, VME64, and PMC expansion
MVME2604-1451 is within the official 400 MHz MPC604 MVME2604-1401 through MVME2604-1471 group and uses 128MB ECC DRAM.
The board combines 9MB Flash, protected memory, VME64 transfers, PCI peripherals, and a PMC position in a single VME slot.
Confirm the exact 1451 memory build, IEEE 1101 front panel, MVME761 connection set, firmware, and thermal environment before deployment.
The Motorola MVME2604-1451 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2604-1451 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2604-1451 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2604-1451
- ConditionNew Original ready stock
- Product FamilyMVME2600 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
400 MHz compute architecture
- CPU: The ordering range uses a 400 MHz MPC604 PowerPC processor.
- L1 cache: The MPC604 provides separate 32KB instruction and 32KB data caches.
- L2 option: A 256KB look-aside L2 cache is supported as a build option.
- Interrupt control: Raven supplies the PCI host bridge and multi-processor interrupt controller.
Local-bus expansion resources
- PCI bus: The 32/64-bit PCI local bus operates at 33 MHz.
- PMC position: One IEEE P1386.1 compatible 32/64-bit PMC slot is provided.
- P2 signals: Rear PMC I/O depends on VME64 extension connector support.
- Carrier option: The expansion connector accepts supported PMC carrier hardware.
System matching requirements
- Order-code check: Use the full MVME2604-1451 code when matching memory and panel style.
- Transition hardware: Select the correct MVME761 module, P2 adapter, and cables.
- Cooling: Provide forced airflow across the 400 MHz processor and memory assembly.
- Diagnostics: Run the Motorola firmware tests after installation or configuration changes.