Features:
- 1 GHz MPC7455 processor with 512 MB ECC SDRAM
- Two 33/66 MHz PMC sites and VME64 connectivity
- Gigabit Ethernet plus 10/100BaseTX networking
Motorola MVME5500-0161 is the Scanbe-handle configuration with 40 MB Flash and MOTLoad firmware.
MVME5500-0161 combines dual PCI buses, PMC expansion, dual Ethernet paths, and Universe II VME access for high-throughput embedded systems.
Confirm handle type, P2 routing, PMC and memory-mezzanine population, rear I/O, transition hardware, and operating-system image before installation.
The Motorola MVME5500-0161 VME Single-Board Computer may be sourced with official documentation and configuration review from Apter Power.
Motorola MVME5500-0161 VME Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME5500-0161 VME Single-Board Computer Specs
General
- ManufacturerMotorola VME
- ModelMVME5500-0161
- ConditionNew Original ready stock
- Product FamilyMVME5500 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard processing and memory resources
- Processor: 1 GHz MPC7455 processor.
- Main memory: 512 MB onboard PC133 ECC SDRAM.
- Installation check: 256 KB L2 and 2 MB L3 cache.
- Firmware storage: 40 MB total Flash memory.
PCI expansion and mezzanine resources
- PCI bus: Dual 64-bit PCI buses.
- PMC expansion: Two 33/66 MHz PMC sites.
- PMC expansion 2: PMC rear I/O through configurable P2 mode.
- PMC expansion 3: PMCspan expansion connector.
Network ports and service firmware
- Ethernet: 10/100/1000BaseTX Ethernet.
- Ethernet 2: Second 10/100BaseTX Ethernet interface.
- Serial communication: Two asynchronous serial ports.
- Service firmware: MOTLoad boot and diagnostic firmware.