Features:
- Base Module for FAU810 Series Functional Units in ABB Industrial Control Systems
- Integrates Mechanical Mounting Platform with Standardized Electrical Connectivity
- Functions as the Foundation for C87-11006 Module Installation and System Integration
The ABB C87-11006 FAU810 Base serves as the fundamental mounting base for FAU810 series modules within ABB automation architectures, providing stable mechanical support and standardized electrical interfaces for all attached components. It establishes the physical foundation required for secure module retention and reliable signal distribution throughout the control system. Consistent module alignment is inherent with the C87-11006, and utilizing proper installation procedures ensures optimal contact integrity and vibration resistance for all connected FAU810 units.
The C87-11006 provides essential mechanical and electrical functions common to the entire FAU810 module assembly, and is a critical component of the control system infrastructure, directly affecting the proper, normal operation of the overall automation setup. One C87-11006 FAU810 Base is required per FAU810 module installation depending on the specific system configuration. The C87-11006 occupies the designated base position in the assembly and serves as the foundational mounting point for the functional module.
For expanded system applications, the FAU810 configuration may require additional C87-11006 FAU810 Base units installed to support multiple functional modules. In addition to standard single base mounting, the modular configuration also supports flexible system scaling. The C87-11006 base system enables expansion through standardized mechanical interfaces and consistent electrical connectivity specifications.
The C87-11006 ABB FAU810 Base may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB C87-11006 FAU810 Base Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB C87-11006 FAU810 Base Specs
General
- Manufacturer ABB
- Model C87-11006
- Condition New Original ready stock
- Product Family C10-12010,FAU810,SF810
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Power Plants: Monitors fossil fuel burners inside large-scale utility boilers.
- Refinery Furnaces: Secures multi-burner process heaters against flame-out conditions.
- Fuel Switchover: Uses digital inputs to change safety profiles when switching from gas to oil.
- System Integration: Acts as a bridge to connect old DFS scanners to new SF810 scanner networks.
- Temperature Limits: Operates reliably in ambient cabinet conditions from –40 °C to +85 °C.
- Power Supply: Accepts redundant 24 VDC (±20%) inputs with built-in isolation diodes.
- Industrial Compliance: Holds official CE mark certification for heavy industrial use.
- Safety Timers: Allows tuning of Flame Failure Response Time (FFRT) between 0.2 and 4.0 seconds.
- HMI Display: Includes on-board buttons and a display screen for direct field setup.
- Software Interface: Programs deep parameters via the ABB Flame Explorer PC application.
- Telemetry Output: Outputs flame quality data over dual isolated 4–20 mA analog channels.
- Network Drivers: Connects to control networks via Profibus DP-V1 or Modbus RTU links.