Features:
- Legacy MFD identity: retains the exact EC-BOM-G009HLA012 configuration reference.
- Scanner-dependent control: keeps the installed flame-scanner interface within scope.
- Burner-management boundary: preserves alarm and trip functions during service.
The complete BOM number identifies a Uvisor MFD control configuration rather than a generic flame-control module.
Scanner type, field wiring and the burner-management trip chain define whether a legacy spare can be accepted.
A controlled restart proves flame recognition, loss-of-flame response and the required safe shutdown before the burner returns to service.
Apter Power can review the installed scanner, wiring and burner-management record for ABB EC-BOM-G009HLA012 Uvisor MFD flame-detection control unit enquiries.
ABB EC-BOM-G009HLA012 Uvisor MFD Flame-Detection Control Unit Manuals,Datasheets,Link
Important Notice: No qualified exact-model English PDF is attached. Use the complete product model in every document request.
- Architecture: previous ABB Uvisor MFD flame-detection platform.
- Control identity: retain the complete EC-BOM-G009HLA012 reference.
- Scanner pairing: identify the installed flame scanner before selection.
- Control boundary: preserve alarm, relay and trip functions.
- Terminals: capture every power, signal and relay connection.
- Trip chain: document the burner-management shutdown path.
- Shielding: preserve scanner-cable routing and grounding.
- Baseline: record normal flame-signal and relay behavior.
- Pre-start: verify wiring against the controlled schedule.
- Flame detection: prove recognition under the approved test method.
- Loss of flame: confirm alarm and safe-trip response.
- Release: complete the burner-management functional test.
- Legacy burner systems: service of installed Uvisor MFD controls.
- Flame-scanner loops: configuration-specific detection and relay interfaces.
- Outage preparation: exact-part sourcing from an installed BOM record.
- Controlled migration: engineering review before a newer platform is selected.