- Integrated converter and one inverter position in one Bulletin 2094 module
- Left-end power-rail position supplies the shared DC bus to permitted axis modules
- Safe Torque Off supports a separately validated machine-safety circuit
2094-BC01-MP5-S provides the line-side conversion function and the first inverter position in a Kinetix 6000 multi-axis architecture.
Its integrated layout reduces separate power components, while the complete rail must still be sized as one coordinated system.
Confirm the rail catalog number, added-axis order, controller interface, shunt arrangement, connector hardware, enclosure design, grounding, and validated safety architecture before commissioning.
Availability, condition, price, and shipping time for 2094-BC01-MP5-S are confirmed during quotation.
Allen-Bradley 2094-BC01-MP5-S Kinetix 6000 Integrated Axis Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- SERCOS communication connects the drive system to the supported Logix motion controller
- Axis configuration, tuning, homing, limits, and fault actions are managed in the Logix motion project
- Hardware Series and firmware compatibility must be checked before restoring an archived project
- Separate connections are provided for mains input, control power, motor power, feedback, and safety wiring
- Motor and feedback cables must match a supported Rockwell Automation motor-drive combination
- Shield bonding, conductor routing, bend radius, and connector torque must follow the Kinetix 6000 installation instructions
- Status indicators and drive fault codes support module, axis, feedback, and communication troubleshooting
- Fault history should be recorded before power cycling or replacing the installed module
- Control power can support diagnostic access only when the official electrical-safety procedure permits it
- Multi-axis machines using a Bulletin 2094 power rail and supported Kinetix 6000 axis modules
- Logix-coordinated motion systems that require one integrated converter and inverter position
- Machines requiring Safe Torque Off as part of a separately designed and validated safety system