- Frame 3 Kinetix 5500 platform for one higher-current servo axis
- Integrated Motion over EtherNet/IP links the axis to a supported Logix controller
- Hardwired Safe Torque Off interfaces with the validated machine-safety circuit
Allen-Bradley 2198-H070-ERS is selected as part of a complete controller, motor, feedback, brake, and cable combination.
The installed supply class and axis duty determine the operating point, protective-device selection, line filter, and regeneration review.
Confirm the full catalog number, hardware Series, firmware, shared-bus components, motor-feedback pair, cabling, grounding, cooling, and safety validation before commissioning.
Availability, condition, price, and shipping time for 2198-H070-ERS are confirmed during quotation.
Allen-Bradley 2198-H070-ERS Kinetix 5500 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- DSL feedback and motor-temperature data use the supported single motor cable
- The feedback and brake interfaces must match the selected motor catalog number
- The combined motor-power cable length is limited to the documented 50 m maximum
- Standalone operation supports the documented DBR40-F or DB42-F line-filter selection
- Multi-axis operation requires the filter to be selected for the combined input arrangement
- Filter installation and conductor routing must follow the Kinetix installation instructions
- Standalone and shared-input systems use different documented branch-protection selections
- Solid-state motor overload protection is integrated in the drive
- Grounding, shield bonding, and Safe Torque Off wiring require separate installation checks
- Higher-current single-axis motion coordinated by a supported Logix controller
- 240 V three-phase machines using the documented 7.0 kW operating point
- 480 V three-phase machines using the documented 14.6 kW operating point