- Single-axis Kinetix 300 platform with EtherNet/IP communications
- Removable memory-module socket supports documented parameter storage and service workflows
- Dedicated mains, DC-bus and shunt, backup-power, I/O, motor-power, and feedback connections
Allen-Bradley
2097-V31PR0 operates as one independently configured indexing axis and exchanges commands, status, and diagnostic information through its documented control interfaces.
The machine configuration includes the controller or indexing method, network and I/O assignments, motor and feedback selection, homing and limits, protection settings, and safety circuit.
Confirm the complete Series 1 nameplate, saved parameter set, connector hardware, motor and feedback cables, external shunt selection, enclosure clearances, grounding, and the engineering requirements of replacement 2198-E1004-ERS before commissioning.
Availability, condition, price, and shipping time for 2097-V31PR0 are confirmed during quotation.
Allen-Bradley 2097-V31PR0 Kinetix 300 EtherNet/IP Indexing Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The control backup input accepts 20...26 V DC
- Nominal backup-current consumption is 500 mA
- The backup-power input has a documented 30 A inrush current
- A removable memory module socket is provided on the drive
- Stored drive parameters should be backed up before removal
- The replacement drive must be commissioned with the verified machine parameter set
- The short-circuit rating is 100,000 A rms symmetrical
- Branch-circuit protection must follow the Kinetix 300 installation tables
- Safe Torque Off wiring and protective grounding require validation after service
- Single-axis machinery using a supported Kinetix 300 motor-feedback combination
- Indexed positioning or coordinated motion according to the documented drive-family control architecture
- Legacy Kinetix axes undergoing controlled maintenance or engineered migration to 2198-E1004-ERS