- Higher-capacity line-side supply for a Kinetix 5700 shared DC-bus system
- 85 mm format uses the documented common-bus connection hardware
- Input switching uses the documented contactor and intermediate-relay arrangement
Allen-Bradley 2198-P141 converts three-phase mains power and establishes the DC bus for compatible Kinetix 5700 inverter modules.
Its contactor, relay, reactor, filter, protective devices, conductors, and bus connectors must be selected as one coordinated input system.
Confirm hardware Series, firmware, connected inverter load, total bus capacitance, regenerative energy, grounding, conductor routing, and cabinet cooling before commissioning.
Availability, condition, price, and shipping time for 2198-P141 are confirmed during quotation.
Allen-Bradley 2198-P141 Kinetix 5700 DC Bus Supply Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- 100-C72DJ10 is the documented mains-contactor selection
- The documented arrangement includes an intermediate relay in the contactor control circuit
- Contactor coil and auxiliary-contact wiring must match the installed control design
- DBR90-F or DB80-F is documented for the line-filter arrangement
- 1321-3R55-B is the documented line-reactor selection
- Filter and reactor placement must follow the Kinetix installation instructions
- 2198-BARCON-85DCAC100 supports the applicable 85 mm bus connection
- The supply contributes 1640 µF to total connected DC-bus capacitance
- Controller firmware and every connected inverter must be included in system validation
- Higher-capacity multi-axis Kinetix 5700 shared-bus systems
- 240 V installations whose complete connected load fits the supply limits
- 480 V installations sized for the documented bus current and regeneration duty